GT0305 Auto Body filler car repair

GT 0305 Repair Poly Putty Base Consists of Product: ploy-Putty is also known as unsaturated polyester putty, consisted with unsaturated polyester resins, pigments and physical pigments, additives and curing agent. product use: It is mainly used to repair flaws such as substrate pits, needle shrinkage, cracks and weld defects before coating top-coat, so that the substrate surface Flat, to meet the top-coating fullness, smoothness and fresh, etc requirements of appearance decorative. Picture of requirements. Main technical indicators: Item Technique Index test method Putty Appearance No feeling of crust and Stir open Vasual gel time(Period of application) ≥5min 25°C,2% curing agent Day time ≤2H 25°C,2% curing agent Coating film Appearance Color uniformity, no obvious coarse-grained and holes, after dry without crack GB/T 1727 rubbing property Easy starting powder, non-stick sandpaper GB/T 1770 Flexibility ≤100mm GB/T 1748 Impact Strength ≥300N.cm GB/T 1732 Usage: 1, Get rid of being coated oil stain, rust, old paint and water; 2, Mix thoroughly the main ash and firming agent according to 100:2 (weight) and to ensure color consistency, and within 10 minutes finish scraping coated; 3, Coat putty blended on the metal surface, if the bubble inflow, must use scraper to strickle thoroughly; 4, See that After hardening thorough, you can wet grind or dry grind. Notes: 1, Capped immediately when not in use so as to avoid solvent evaporation metamorphism; 2, Incorporating "Thinner" or other foreign objects is strictly prohibited; 3, Mill with water and polish, until after the moisture dry,you can Spray paint; 4, The used mixture of putty should not be placed in the original container; 5, Stored in ventilated shade and avoid heat and direct sunlight and rain, etc.; 6, In the period of low temperature and high humidity , the hardening time will be longer; 7, You’d better use this product within 12 months,after it is made. The consistency of putty, gel time (period of application) can be adjusted according to customer's specific condition.