GPS external antenna

GPS antenna car antenna product name Car Antenna GPS Active Antenna,GPS Passive Antenna,GSM Antenna,GPS GSM Antenna,WIFI Antenna,all kinds of RF connectors and Interface Cables and so on. 3.1LNA/Filter Form 1 NO. Item Specifications Post Invironment Tolerance 1 LAN gain 28±3 dB ±2.5 dB 2 Noise Figure 1.5 dB — 3 Filter out Band Attenuation 14dB Min f0+50MHz 18dB Min f0-50MHz 30dB Min f0+100MHz 42dB Min f0-100MHz 4 DC Voltage 3 5V 5 DC Current 8 15mA 3.2 Mechanical Form 2 NO. Item Specification 1 Cabele RG174 3m/5m or others 2 Connector SMA/SMB/MCX or others 3 Plastic Housing Black 4 Mounting Magnetic/Stick 4 Reliability Condition Temperature: 40±5°C Load DC=5V±0.5 V Sustained Time 480h 5 Environmental Specifications Condition Post Environmental Tolerance (Refer to the form 1) Temperature range 25±3°C Relative Humidity range 55 75%RH Operating Temperature range -40°C +85°C Storage Temperature range -40°C +100°C 5.1 Moisture Proof The device should satisfy the electrical characteristics specified in form 1 after exposed to the temperature 40±2°Cand the relative humidity 90 95% RH for 96 hours and 1 2 hours recovery time under normal condition. 5.2 Vibration Resist The device should satisfy the electrical characteristics specified in form 1 after applied to the vibration of 10 to 55Hz with amplitude of 1.5mm for 2 hours each in X , Y and Z directions. 5.3 Drop Shock The device should satisfy the electrical characteristics specified in form 1 after dropping onto the hard wooden board from the height of 30cm for 3 times each facet of the 3 dimensions of the device. 5.4 High Temperature Endurance The device should satisfy the electrical characteristics specified in form 1 after exposed to temperature 80±5°Cfor 24±2 hours and 1 2 hours recovery time under normal temperature. 5.5 Low Temperature Endurance The device should also satisfy the electrical characteristics specified in form 1 after exposed to the temperature -40°C±5°Cfor 24±2 hours and to 2 hours recovery time under normal temperature. 5.6 Temperature Cycle Test The device should also satisfy the electrical characteristics specified in form 1 after exposed to the low temperature -25°Cand high temperature +85°C for 30±2 min each by 5 cycles and 1 to 2 hours recovery time under normal temperature 6 Weatherproof Put the antennas in 1m deep water for 12h, and find 100% waterproof