goods lift

Goods lift function: full connective control: under the conditions of automatic running,after comrehensively analyzing and judging the floor upper and lower calling signals and command insider car. It automatically gives priority to the signal which cioncides with the elevator running direction.emergency car lighting: when power fails,emergency lighting in the car automatically turns on.light curtain protection: multiple infrared-light beams covering the full height of the door as the door opend or closes detect passengers or objects.full-load non-stop: when load inside car reaches the full-load pre-set constant value, the lift will not respond to any outer hall calling and directly respond to car instruction for non-stop reach of the designated floor.overload holding stop: A buzzer sounds to prevent an overloaded car from leaving the floor.car ventilation light automatically shut off: If you shut off the switch of base satiation, the car stops between floors, after restoration of power, the car will move to the energy at once.power on re-leveling: If power off or malfunction, the car fan and car light areautomatically shut off to conserve energy at once.main floor shut off: the car can be called to main floor(after servaice)by a key-switch and out of service automatically.power on re-leveing: In the predetemined period of time without leaving the doorzoon, the car will stop to run.inspection operation: When entering inspection operation, the car will come into inching operation at 0.3m/s.inching operation: When enter emergency electrical operation in machine room, the car will come into inching operation at 0.3m/s.Well floor distance automatic-study: Before the formall lift running, it needs to automatically study the well floor distance so that it can various floor spacers into computer and calcalate the distance in normallift running.