GL 9000 industrial sealant

industrial sealant/industrial adheisve/curtain wall sealant: Description: GL 9000 industrial sealant is a neutral curing, high performance architectural gradesealant, Specifically designed for architectural glazing such as masonry/metal cladding,expansion and control joints, curtainwall weatherseal and perimeter joints Application: 1. Structural adhesion and sealing in glass curtain walls, stones (marbles and granite) walls, aluminum curtain walls, glazing roofs and metal structures. 2. Secondary sealing in insulation glass. 3. Sealing in high building and industrial application. 4. Sealing in other construction and industries. Characteristics: 1. Fast curing 2. Abrasion resistant 3. Resistant to aerobic and anaerobic bacteriological attack 4. Excellent application characteristics 5. High strength adhesive bond 6. Permanently flexible Technical Data: ItemStandardsTest ResultsSlump, mm≤30Extrudability, s≤105.6Skinning time, h≤30.7Hardness, Shore A20-6042Tensile adhesion at 23Tensile adhesion strength, MPa≥0.600.87Adhesive damage area,%≤50Ultimate tenisile strength at 23, %≥100194Tensile modulus at 23,MpaTensile stretch at 10%/0.18Tensile stretch at 20%/0.31Tensile stretch at 40%/0.47 Colors: GL 9000 industrial sealant is available three standard colors: White, black, grey and the other colors base on customer's requirement Meet the standard: GB16776-2005 Storage and usable life: 12months shelf life if stored below 27oC in cool, dry places after the date of production. Instruction : Clean and dry surface, remove any stains and impurities with solvents, then, cut the nozzle to a desired opening angle and apply sealant with caulk gun, and press it out at 45 degrees. Normally cure on surface in 15 minutes, and solidified in 7 days that come up to its adhesive intensity. Caution: 1.When skin or eye contact occurs, immediately flush with water for 15 minutes, get medical attention, if irritation persists. Fully cured sealant is not hazardous. 2.Used in the well-ventilated environment. 3.Keep out of reach of children. Limitations: 1. Not suitable for frost-laden or wet surfaces. 2..Not recommended for oil contained or blended surfaces. 3. Not suitable for confined joint(the sealant need atmospheric moisture for cure) 4. Not suitable to use when the temperature of the materials surface is lower than 4oC or higher than 40oC . Inner Packing: 300ml plast cartridge, 25PCS/CTN 595ml in multi-membrane cartridge/ aluminum sausage, 20PCS/CTN Outer Packing: Dimensions for 25pcs of 300ml: 25.3×25.3×24.5 (cm) Dimensions for 20pcs of 595ml: 36.5×21.0×26.0 (cm)