GH-1 Curing and Drying Chamber

GH-1 Curing and Drying ChamberSummary GH-1 curing and drying chamber is an advanced product which absorbed American OSI technology. As an ideal sunstitute of imported products, it could automatically fufill the curing and drying procedure automatically without guarding. Structure of the equipment GH-1 curing and drying chamber is composed of main box, heating box, main machine controller and system control box. And there are hot air circulating system, heating system, humidification System, temperature& humidity control system and air inlet&outlet system between the main box and heating box. Technical Parameters 1 Control range Curing process: temperature: 40 85°C; humidity: above 85%. Drying process: temperature: 55 85°C; humidity: lower than 10%. 2Control precision Temperature: set value ±1°C Curing humidity: set value ±2%RH. (note: at the beginning of curing process, after cooling and air-inlet, the temperature maybe still higher than the set value because the oxidation heat is high. ) 3Conversing speed Temperature: more than 1°C/3min, humidity: more than 2%RH /3min. 4Curing & drying period: curing 18 hours; drying 22 hours. 5Resources to be prepared by the user: 5.1 Power: Three-phase five-wire system, 380V/220V, 7.5kw(blower)+75kw(eletric heating) 30A; gound resistance: lower than 10Ω. 5.2 Compressed air: 0.4Mpa 0.6Mpa 0.3 0.8m3/min/set 5.3 Water pressure: 0.2Mpa 0.4Mpa 6,Dimension: maximum outside dimension: 5000(W)*3500(T)*2900(H) 7, Temperature difference between outside wall and surrounding: not high than 5°C. 8,Noise: not lower than 65dBA. Supply range Electric control cabinet 1 set 1.1 touchscreen 256 colors 1 setMITSUBISHI 1.2 PLC module: DVP series 1 set MITSUBISHI 1.3 frequency converter: 7.5 kw 1 set KOREA LG 1.4 High-temperature limit controller 1 set 1.5 contactors etc. 1 setCHNT 2 Temperature/humidity sensor 1 set Japan KYOKUTO 3 Circulating blower Power: motor 7.5kw 960r/min Material: stainless steel 1 set 4. Main box: 1 set Outside dimension: width 5000mm, depth3500mm, height 2900mm. Material: Inner surface: 0.5mm stainless steel.outer surface: color steel plate. Middle: Polyurethane. Structure: assemblying structure, removable. 5 Attached box: 1 set Dimensions: Width 5000mm, depth 1600mm, heigth 1200mm. Material: inner surface:0.5mm stainless steel.outer surface: color steel plate. Middle: Polyurethane, circulating duct: 1.5mm stainless steel. 6,Door: 1 set. With sealing ring to prevent aging. 7 High-efficient atomizing nozzle 5 pieces; material : stanless steel 8 Water tank: one set, material: stainless steel 9 Air distribution screen: stainless steel 1 setself-made 10Pipeline 1 set.