Galvanized Gabion box

Galvanized Gabion box:Galvanized Gabion box Wire dia:2.0mm-4.0mm Meshopenning:60x80;80x100;80x120;100x120;120x150;100x150; Zinc coating:20-90g/m2 Woven mesh gabion boxes are hexagonal, double-twistedwire-meshstructures. The gabion boxes are divided into chambers by inserting diaphragms every meter. The wire used for making the boxes is made of thickly plated mild steel. The gabion units are delivered to the site flat-packed. The double-twisted mesh connections of the woven mesh prevent the mesh from coming apart if the wire is cut or snaps, in each case the location of the fault is restricted to the neighbouring areas. The units are attached to each other using stitching wire and/or staples. Length(m) Width(m) Height(m) 1,0 0,5 0,5 1,5 1 0,5 2 1 0,5 3 1 0,5 4 1 0,5 1,5 1 1 2 1 1 3 1 1 4 1 1 Wire-mesh Wire-mesh hole size 80 x 100 mm Wire size 2,7 mm Size tolerance of structures Lenght 1,5 - 2,0 - 3,0 - 4,0 m ± 3% Width 0,50 - 1,0 m ± 5% Height 0,5 - 1,0 m ± 5% Woven mesh gabion mattresses Length(m) Width(m) Height(m) 3-4-5-6 2 0,17-0,23-0,30 Wire-mesh Wire-mesh hole size 60 x 80 mm Wire size 2,2 mm Size tolerance of structures Length 3 - 4 - 5 - 6 m ± 3% Width 2 m ± 3% Height 0,17 - 0,23 - 0,30 m ± 5% Lenght(m) Width(m) Height(m) 1 - 1,5 - 2 - 2 - 4 - 5 0,5 - 1 - 1,5 - 2 0,3 - 0,5 - 1 Gabion made of welded steel mesh Gabion units made of welded steel mesh are square wire-mesh structures. Panels are placed every metre inside the gabion units. The wire used for making the boxes is made of thickly plated steel. The gabion units are delivered to the site bundled per panel or partly assembled. The units can be assembled with spiral binders, stitching wire and/or staples. Technical characteristics The mesh/wire versions generally used are summarised in the table below. In order to strengthen the head wall of the structures, they can be constructed of steel wire with a larger diameter. For the sizes and size tolerances belonging to the different versions see the table of type dimensions below: Lenght(m) Width(m) Height(m) 1 - 1,5 - 2 - 2 - 4 - 5 0,5 - 1 - 1,5 - 2 0,3 - 0,5 - 1 Mesh-wire Mesh hole size 75 x 75 mm Wire size 3-4,55 mm Size tolerance of structures Lenght 1,5 - 2,0 - 3,0 - 4,0 m ± 0,5% Width 2 m ± 0,5% Height 0,3 - 0,5 - 1,0 m m ± 0,5% Woven mesh gabion mattresses Lenght(m) Width(m) Height(m) 3-6 2 0,15-0,225-0,30 Mesh-wire Mesh hole size 75 x 75 mm Wire size 3-4,55 mm Size tolerance of structures Lenght 3 - 4 - 5 - 6 m ± 0,5% Width 2 m ± 0,5% Height 0,15 - 0,225 - 0,30 m ± 0,5%