gabage compactor,LYC10

Features: 1. High compression ratio of garbage, short cycle time and high efficiency. 2. Compactly designed to reduce external contruction costs. 3. Different control locations from either inside or outside of the cab. 4. Main structural parts are treated with shot peening and then applied with anti-rust primer and finally with epoxy coatingt. With all these it can withstand rough working environment and achieve longer service time. 5. The use of key components in the hydraulic system is of international name brand, which guarantees the reliability of the system. DescriptionTechnical ParametersDimension(length×width×height) mm 5500×3250×5500 Rated daily disposing amount t 100 Maximum daily disposing amount t 120 Capacity of compressin bin m3 5.0 Size of garbage chunk mm 1850×1600×1500 Weight of garbage chunk t 4×2=8 Rated system working pressure MPa 21 Power kw 30 Procedures 1. Loose garbage collected in the transfer station is dumped into the compression bin of the dustbin. Under hydraulic cylinders the compression tower will compress the loose garbage until a standard chunk is formed. 2. The first chunk is then pushed to storage silo where it waits for the second garbage chunk to come. The waste water produced in the process is drained to the sewage pipe net through drainage pipe. 3. The dustbin is then elevated to the height of body of garbage transfer vehicle into which two garbage chunks are pushed. 4. The garbage transfer vehicle leaves the transfer station. The dustin is lowered to the pit, waiting for the next operation.