Functional Paints and Coatings

functional paints and coatings --> Anti-corrosion serial products1. BIAM® T-541 inner-face coating for large food containers T-541 is a new kind of solvent-free， two-component inner-face coating for large food containers. And it was the key issue of the "Beer System" project of the former Ministry of Light Industry during the "Seventh Five-year plan". T-541 has been widely used in about 500 beer manufactories of our country in recent several years, and the whole finished coating area has reached about 1.3 million square meters. 2 BIAM® T-551 inner-face coating for large wine containers T-551 inner-face coating, the shorten form was T551 coating, is a new kind of solvent-free two-component coating for large wine containers, and has good resistance to high-density alcohol. At the present, T-551 coating has been used in more than 40 wine manufactories all over the country. And the whole finished coating area has reached more than 200 thousand square meters, and the largest area is 30 thousand square meters. 3 BIAM® T-541 coating of alkali-resistant Following the T-541、T-551、T-541J coating is also a kind of solvent-free, two-component coatings of the institute. It is no harm to the environment., T-541J has been applied in the alkali containers of the fiber production line in the synthetic fiber factories, and the coating is completely clean-cut. 4 BIAM® T-541S inner-face coating for drinking containers T-541S is one of solvent-free, two-component coatings for inner face of drinking containers,it is harmless to the environment and the human beings. This coating has no danger of exploding when it is being applied. After curing, the compact glossing coating also has no smell when it is dipped in water. And it is unnecessary to dip the containers in water, just clean them in accordance with the normal procedures before the containers have been applied this coating. 5 BIAM® inorganic coatings This kind of coating has excellent ability of catholic protection , excellent resistance to the alcohol，seawater，wet atmosphere and salty fog etc.. The coating also has a high stability to all kinds of organic solvents and mineral oils, and good resistance to the high temperature of 400°C. And it is ordorless, innocuous, harmless, and has no volatile of solvent. Low electric resistivity can make the coating good resistant to static electricity. The longevity of the top coating and the primer is the same, without aging phenomena and catalytic reaction. The longevity of the coating is longer than 25 years in the sea atmosphere. 6 BIAM® 881 serial anti-corrosive coatings All the 881 serial anti-corrosive coatings are air-curing and two-component coatings, and they have resin, as the binder, and the anti-corrosive pigments, filler, additives and other special curing agent etc.. 881-D02 epoxy MIO anti-corrosive primer 881-D01 epoxy iron oxide red anti-corrosive primer 881-X epoxy zinc rich primer 881-H01 modified epoxy top coating 881-Y01 acrylic polyurethane top coating 881-Z01 epoxy MIO intermediate coating 881 epoxy seal vanish 881-B01 acroylic top coating 881-HL epoxy tar anti-corrosive paints These products can be used separately or to make up coating system for different demands. The protection period of the heavy duty coating can reach 25 years. 7 BIAM® 901 anti-corrosive coating system 901 ceramic glaze coating is a new kind of anti-corrosive decorative coating, which is made up of special resin, pigment and filler, etc. and has decorative effect like ceramic glaze. Like ceramic glaze, the surface of this coating is flat, bright and plump. The coating isn't fragile, with excellent adhesion, abrasion resistance and good flexibility. The coating has also good resistance to water, alkali, oil, salt water, and other corrosive media. The coating is innoxious and can reach the standard of drinking water. With good detergent resistance, the coating is easy to wash and to recoat. The top coating of the system has excellent ultraviolet-aged resistance.　--->　 Fire-resistant serial products BIAM® fire resistive coating for steel structure Fire resistive coating for steel structure has excellent weathering resistance, and it can be used at the temperature of 0°C. This coating has nice appearance and can be used for bare steel structure. The coat has also excellent endurance, water resistance and can be adhered strongly to the base metal. Except thermoplastic primer, these products have excellent compatibility with anti-corrosive primer and they don't need any glass cloth. 　　Main products: 　　GJ-3 fire resistive coating for thin steel structure 　　GJ-3L water-based fire resistive coating for steel structure 　　GJ-1H heavy film fire resistive coating for steel structure