Full Servo Under Pad Machine JWC-CFD-SV

1. main procedures:1). Single route forming of the core. Crusher can crush treated and untreated fluff pulp. Fluff pulp feeding is controlled by servo motor. Or this part material can be replaced by airlaid paper.2). SAP feeding device, SAP is added mixed with fluff pulp and controlled by servo motor. If airlaid paper replaces fluff pulp, then SAP feeding device can be cancelled.3). Tissue paper two sides folding. If airlaid paper replaces fluff pulp, then tissue paper is unnecessary to use.4).calendaring device5). shape fixing of the tissue paper two sides folding. If airlaid paper replaces fluff pulp, then tissue paper is unnecessary to use.6). Net shape pressing device. Cylinder pressing.7). Fluff core or airlaid paper position adjusting device8). Fluff core or airlaid paper cutting device. Cylinder pressing.9). bottom film and topsheet feeding, Glue adding and fixing shape by pressing.10). Silicon rubber roll device to press the glue on the pads two sides.11). Pad vertical folding12). final cutting. Cylinder pressing.13). Wastes rejection device14). Pad crosswise folding15). Auto-counting and arrange coming out.16). Raw material driving wheel, limitless speed adjusting17) . Adopting carrier before pressing device4 automatic functions:1). Germany Rexroth(Borsch Group ) or Japanese Mitsubishi full servo non-axis transmission and controlling system.2). Automatic inspection of raw material broken, missing, winding, splicing and auto-counting.3). Each moving unit adopts individual servo motor driving and there are 33 servo motors in all.4). Servo moving controlling can monitor all the servo motors accurately and synchronously.5). Non-woven, PE film, tissue paper or air-laid paper raw materials adopts auto-unwinding controlled by servo motor, constant tension controlling, auto stopping raw materials, auto-splicing raw material without slowing down the speed.6). American Accuweb edge guiders on non-woven, PE film, tissue paper or air-laid paper separately.7). computer controlling system(that is PLC-industrial computer-servo motor controlling system)8) button box arranges in turn and each button box has emergency button.9). It adopts Japanese Omron temperature controlling system.10). Automatic and manual exchange of material stopping and splicing can all carry out on both the touchable screen and button box.11). On the touchable screen, there is the function that when main machine stops running, glue applicator automatically interrupts spreading the glue; When machine begins running, glue applicator automatically begins working. Glue applicator can also be equipped with manual switch.12). SAP feeding amount can be set on touchable screen.13). Fluff pulp feeding amount can be set on touchable screen.14). Touchable screen can show single shift productivity and total productivity.15). Wastes caused by splicing material is rejected automatically. Automatically inspect raw materials attachment(require the material attachment has color mark) and reject the wastes due to this factor. Rejected pcs can be set on touchable screen.16). Auto-inspection of all materials finishing and stop running automatically.17). Main machines speed down and up can be set on touchable screen. Speed(pcs/min) is displayed on the screen.18). It stops running if it is due to Electric appliances failure, displays the reason automatically and stores all the historical failures records,19). It is equipped with automatic and manual rejection switch.20) screen adopts colorful industrial computer controlling and picture displaying for convenient operating.21). Three-color alarm lamp and multi-voice auto alarming fuction