FT-50G PCM Multiplexer

FT-50G PCM Multiplexer provides the excellent voice quality and is the best timely solution for all telecom carriers and private enterprises. In combine with the E1 wireless or fiber optical network, the FT-50G PCM Multiplexer can achieve the fastest voice / data deployment as the voice extender; point-to-point hotline; or 64K leased data services, especially for the rural area and the remote office.FT-50G PCM Multiplexer can be configured as PDH fiber/electrical integrator, 4E1 30 cross-connect channel PCM equipment or D/I device. It is widely deployed in The equipment enjoys high flexibility, modularity and scalability in configurations, it is easy to install and maintain. It has powerful network management system which can realize software live-upgrading, remote network management and remote monitoring. Main Features * High Integration and Flexible Configuration -Can be configured as PDH fiber/electrical integrator, 4E1 48 cross-connect channel PCM equipment or D/I device -Up to 48 audio and data channels, E1 port can be 75Ohm or 120Ohm, multiple interfaces includes: FXS, FXO, hotline, magneto phone, 2100Hz carrier phone, 2 wire E/M, 4 wire E/M, telegraph, V.35, V.24/V.28, 64K, N×64K, Ethernet interface *High Intelligence and Powerful Network Management System -Can be configured in star or tree network according to users requirements -Up to 4 NMS platforms can run simultaneously in the same network, and the NMS platform can be deployed in any node of the network -Operating status of local or remote devices can be detected and displayed through NMS -Convenient to set cross-connect mode, set the level of analog interface, read devices settings, and easy to maintain -Automatic online test function can realize level test and signaling test for analog interface, functional test for data interface, functional tests of A/B ground, short circuit for external lines, very convenient to locate fault quickly and correctly * High Reliability -Advanced circuit design, modular structure -Adopting low power consumption, high reliable components * Smart Shelf -1U high, 19 standard shelf -Compact, beautiful, light and good strength design *Low Power Consumption -The power consumption is less than 10 Watt Highlights * Mixed voice and data services all-in-one * Limited investment initially * V.35 (Nx64K) and G.703 (64K) co-directional data *RS232 low speed asynchronous data *FXS/FXO support polarity reverse *User definable for 2 or 4 wires E&M *Provides E1 and direct fiber access trunk card *E1 trunk card supports 1+1 trunk protection * FO-4 trunk card provides 4 additional E1 lines Benefits *Flexibility, modularity and scalability in configurations *Build as you grow. Pay for capabilities you require today. Provides improved cash-flow with minimum capital outlay *Future-proof architecture protecting investment *Carrier-class redundancy and high network uptime with minimum loss of revenue *Flexible and cost-effective network solutions *Creation of differentiated services to enhance the portfolio of service offerings *Reduction in operational costs and increase in efficiency through lower provisioning time and operator intervention. Specifications *Optical Fiber Interface -Port number: 1-2, support redundant backup -Bit rate: 150Mbps+/-50ppm -Wavelength: 1310nm/1550nm -Optical power:>-9dBm -Sensitivity:<-38dBm (BER≤1*10-10) -Distance: 0 - 120Km -Connector: SC *E1 Interface -Port number: 4 -Bit rate: 2.048Mbps (50ppm) -Impedance: 75ohm or 120ohm -Line Code: HDB3, compliance with ITU-T G.703 -Jitter: compliance with G.823 *Ethernet Interface -Port number: 4, optional -Speed: 10/100Mbps line speed -Duplex: Half duplex/Full duplex self adaptation -Frame Size: 64 - 1536 bytes -Connector: RJ45 *FXS interface -Standard: EIA RS-464, Loop Start -Impedance: nominal 600 ohm *FXO Interface -Standard: EIA RS-464, Loop Start -Impedance: nominal 600 ohm * E&M Interface -Standard: EIA RS-464, 2/4 wires -Signaling: Type 1 / 5 -Impedance: nominal 600 ohm *Asynchronous Data Interface -Standard: V.24 / RS232C -Data Rate: 150 19.2 Kbps *Synchronous Data Interface -Standard: FV.35 -Data Rate: N x 64 Kbps (N=1 6) *G.703 Co-directional Interface -Standard: G.703 -Data Rate: 64 Kbps +/- 100 ppm *Environmental Requirements -Power supply: -48 VDC +-15% -Fully equipment power consumption: 10W+-10% -Operating temperature: 0ºC 45ºC -Humidity: < = 95% (free from condensing) -Atmospheric pressure: 70 106 Kappa -Storage temperature: -20ºC 70 ºC *Mechanical dimensions -Dimensions: 482 (L) x 240 (W) x 44 (H) mm -Weight: 2.5Kg.