FRP corrugated sheet

Detailed Product Description Reinforced Bending Line: Having anti-pull reinforced with longitudinal uniform distribution (It depends on consumers to choose voluntarily whether adding) Glass Fiber: Adopting Taian high- quality glass fiber, the content no less than 30%. Unit Weight: 1800g/m² 2400g/m² 3050g/m² Nominal Thickness:0.8mm,1.0mm, 1.2mm 1.5mm 2.0mm, 2.5mm Heat Resistance Limit: -60 to +130 Light Transmittance: 75%±2% ( light green) 53%±2% (cream white) Anti- ultraviolet Rate: 99.9% Tensile Strength: 100Mpa Flexural Strength: 180Mpa Cracking Elongation Rate: 1.9% Pasture Hardness: ≥50 Thermal Expansion Coefficient: 2.2×10¯5cm/cm/ Thermal Conductivity: 0.18w/m° k Warranty:15 yearsThe Technical Standard of High-quality FRP 1.Good tenacity. No cracking phenomenon when driving nails in roof installation 2.Having close combining with color steel plate. Cross- section thickness is uniform. The shape of FRP is consistent with steel plate. 3.Transmittance loss rate is low. No yellowing phenomenon after long term service. 4 Thermal expansion coefficient is close to that of steel plate. No cracking and water leakage in nail driving place because of expand with heat and contract with cold. 5.Light through FRP assumes scattering shape and gentle. 6.Bright and clean appearance, no distinct air bubble and cracking on FRP. 7.Anti- ultraviolet and anti- chemistry corrosion. 8.Anti- ageing and anti- pulverizationFRP corrugated sheet(corrugated sheet,fibreglass sheet,building materials,roofing sheet,roof panel)