Front access battery 12V 150Ah

Front access battery12V 150Ah Kweight power is dedicated to produce high quality and relaibility Front access battery. Completely sealed and water-free maintenance; no acid gas and environment friendly. It has adopted colloid electrolyte technology, avoiding density stratification problem of acid solution and eliminating plate corrosion and passivation caused by density stratification. Applied with German Gel formula, grid alloy and plate formula, the battery is performed very well in cycling and recovery from deep discharge, especially in rainy days. More suitable for using in harsh condition than AGM battery as the rich electrolyte inside of the Gel battery makes it working stable in high temperature or over charge. Good performance in cold environment and the battery capacity decreases little when using in low temperature. Little self discharge because of the super-pure material and the low density of the electrolyte, it can be stored over 6 months. Sealed Maintenance FreeThe valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle". Long Service LifeA dependable service life can be expected under normal operating conditions. Long Shelf LifeLow self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life. Wide Operating Temperature RangeMay be discharged over a temperature range of -40ºC to +60ºC (-40ºF to +140ºF), and charged at temperatures ranging from -20ºC to +50ºC (4ºF to +122ºF). Rugged ConstructionThe high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat. The valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique "oxygen cycle".A dependable service life can be expected under normal operating conditions.Long Shelf LifeLow self-discharge rate allows for storage of fully charged batteries for longer periods of time before charging is required. Lower storage temperatures will further extend shelf life.Wide Operating Temperature RangeMay be discharged over a temperature range of -40ºC to +60ºC (-40ºF to +140ºF), and charged at temperatures ranging from -20ºC to +50ºC (4ºF to +122ºF).Rugged ConstructionThe high-impact resistant battery case is made either of non-conductive ABS plastic or styrene. Large capacity batteries frequently have polypropylene cases, all of these materials impart great resistance to shock, vibration, chemicals and heat.