For ps3 move dual charger station

For PS3 Dual charger station Introduction For P-S3 MOVE Dual Charger is a product designed and developed according to the P-S3 MOVE controller. It is dedicated to electricity supplementary of the PS3 MOVE controller and also it can charge two controllers at the same time. Just insert the PS3 MOVE controller into the charger in correct direction. Moreover, this product looks quite attractive and stylish. Features It is designed and developed according to the P-S-3 MOVE controller.It is dedicated to the P-S-3 MOVE controller to charge.It can charge two P-S-3 MOVE controllers at the same time.Just insert and you can charge the controller at any time without external power source Specifications Input voltage: DC5V??%Input MAX current:1AOutput MAX current: 0.8A4. Output voltage: DC5V??% 5. Output ripple: 160??5% Mv 6. Length of USB-MINI USB converting cable: 80CM 7. Weight: 116g 8. Shell material: ABS 9. Dimensions: 120*73.5*36.5MM 10. Color: black 11. Package: Instructions Insert the Mini USB plug of the attached USB-Mini USB converting cable into the USB MINI interface of the charge stand, and insert the USB plug of the cable into the USB interface of the console.2. When insert P-S-3 MOVE controller into the corresponding charge stand, the corresponding LED indicator on the charger will be on, and the LED on the P-S-3 MOVE controller will flash simultaneously, which showing that it is working normally and P-S-3 MOVE controller begin to charge. When fully charged, the LED on the controller will be off. Cautions 1. Please use dedicated USB-Mini USB converting cable to charge. 2. Please remove the power when not using the product for a long time. 3. Make sure that the power supply of the charger is within the range of the input power. 4. Do not leave the product in high heat and damp conditions. 5. Please turn to the maintenance department rather than dismantle it by yourself if the product should break. 6. Only use a chemical-free dry cloth to clean the product.