FKM DHP-205F

DHP-205FFeatures ofFKMDHP-205F are: very good processability. excellent heat resistance excellent chemical resistance, low viscosityTypical Properties Fluorine Content 68.5%Specific Gravity 1.85Physical form SlabColor Off-whiteSolubility Ketones and EstersMooney Viscosity ML 1+10@ 121ºC 25ApplicationsTransfer and injection molding of complex shapes:O-rings, seals, gaskets Extrusions(fuel hose and tubing) DHP-205F can be compounded with internal mixers or two-roll mills with standard fillers and other ingredients that are used in typical fluoroelastomer formulations. All the dry ingredients should be blended before adding to the rubbery solid. During compounding, full cooling should be accompanied. After mixing, the compound should be cooled as quickly as possible. Packing informationDHP-205F is package with PE film in carton. The weight is 20kg net per carton.Safety and handlingz Store in well ventilated placez Smoking is forbidden Strictly in working areasz Avoid eye contactz Wash thoroughly any contacted skin and clothing after handling.