Fiberglass Geogrid

Sales Manager: Danny Mobile Phone:0086 13833865001 :0086 15075828982 Fax:+86 318 2353322 Tel: +86 318 2316633 Website: www.baolixj.com www.baolisl.com Companies: CHINA BAOLI GROUP Address: No.589 Shunping Street High-tech Developing Zone, Hengshi City, Hebei Province, China. Fiberglass Geogrid: Fiberglass geogrid is a new excellent maeterial used for reinforcing road surface and base, it made by fiberglass filament, and covered by special solution. High longitudinal and horizontal strength, low elongation rate, anti-alkali and aging resistance, widely used in asphalt road surface, concrete road surface and reinforceing road base. Packing: with PE bagSSpecifications of fiberglass: SpecificationEVA1×1EVA1×1EVA1×1EVA1×1EVA1×1EVA2×2EVA2×2StrengthLong.Horiz≥30≥50≥60≥80≥100≥60≥80≥30≥50≥60≥80≥100≥60≥80Percentage of Elongation4%4%4%4%4%4%4%Size of Hole mm25.4×25.425.4×25.425.4×25.425.4×25.425.4×25.412.7×12.712.7×12.7Flexibility76767676767676Width M1--61--61--61--61--61--61--6Temperature-100200-100200-100200-100200-100200-100200-100200 Resistance to Fatigue Cracking of Fiberglass Geogrid The fiberglass geogrid in asphalt surface can disperse the compressive strength and tensile strength produced when wheels rolled over the pavement. Buffer zone will be formed between two strength areas, and the strength is gradually changed rather than suddenly changed, thus the damage of strength to the asphalt surface is reduced. In the mean time, low elongation rate of the fiberglass geogrid reduced the deflection of the pavement, and protect the pavement from excessive deformations. High Temperature Rutting Resistantof Fiberglass Geogrid When using fiberglass geogrid in asphalt surface, it acts as skeleton in the surface. Aggregate in the asphalt concrete exists throughout the grid. A composite constraint force in the asphalt surface. The mutual containment of each other in asphalt surface prevents the bed-load of the asphalt surface and resists the effects of rutting. Low temperature shrinkage cracking resistantof Fiberglass Geogrid In low temperature, asphalt concrete will shrink in cold and tensile strength will be produced. If the tensile strength exceeds the tensile strength of asphalt concrete, it will crack. The application of fiberglass geogrid in asphalt surface, improves the horizontal tensile strength of the surface, and greatly improves the tensile strength of asphalt concrete, thus great tensile strength can be resisted without any damage. In addition, even if some area cracks, the strength in the crack will disappear in their transmission in fiberglass geogrid. Delay and reduce reflective fissuresof Fiberglass Geogrid Through paving fiberglass geogrid interlayer in the asphalt, the shearing or tensile strength caused by traffic load will be resisted, strain will be released. It will act as tensile improvement material of asphalt concrete, and the purpose to delay and reduce fissures will be achieved.