Fiberglass Chopped Strand Mat

Fiberglass Chopped Strand Mat Fiberglass Chopped Strand Mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins. The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, Tank, boats, FRP roofing sheet, Auto roof, bathroom equipment and cooling towers etc., General Data: Product Code: EMC & CMC Glass type: E-glass or C-glass Bond type: Powder or Emulsion Density: 80g/m2-900g/m2.Normal types are 180g/m2.225g/m2.300g/m2450g/m2.600m2 Bond Content: 100g/m2 (10%-15%). 300g/m2.450g/m2.600g/m2 (4%-6%) Roll Width: 200mm-2600mm.Normal types are 750mm.1040mm.1250mm.1270mm.1450mm Roll weight: 28kgs-55kgs. Normal types are 28kgs.30kgs.35kgs Package: Product is manufacture in form of a roll wrap on a paper tube then after packed in a plastic bag and placed with in a cardboard carton. Rolls can be loaded in a container directly or on pallets. Quantity: 20'GP Container: About 9500kgs 40'GP Container: About 20000kgs 40'HC Container: About 22500kgs Deposited: Chopped Strand Mat should be stored in dry, cool, clean and rainproof area. Recommended temperature range of storage is between 15-30 and relative humidity between 40%-70%