Fiber Cement Board Reinforced

Fiber Cement Board Reinforced Features 100% non-asbestosDensity: 1,000 - 1,400kg/cbmCoefficient of thermal expansion: 0.24W/MK (JC/T54)Bending strength: over 13MPa (GB/T7019-1997)Linear expansion rate: 0.1%Water absorption rate: less 0.19% (GB/T7019-1997)Water penetration rate: 0%Water content: 10%Incombustibility according to CNS 6532 and BS 476 standardsTwo point five three hours of fire rating for 6mm wall system with W-CSP concreteRadioactivity: GB6566-2000 standardsCharacteristic: nonflammability A grade (GB-8624-1997)Light weightThe wall is solid and firm inside, resistant to impact pressurePainting, tiling and nailing is possible in the new systemNoise reduction can be up to 46dBGood efficiencyWorking environment can keep it dry and clean for better managementApplications: can be used for partitions, interior walls, pipeline and conduit compartments, stair space, exterior walls, ceiling boards and pillar wrapping Introduction The board contains inorganic raw materials such as cement, silica powder and reinforced cellulose fiber as the main materials. HOLY fiber cement board does not contain any of asbestos, however, it has strong bending strength like those with asbestos. HUILON fiber cement board can be applied not only for the interior use but also for the outdoor wall system. It has low water absorption rate and high impact resistant ability. These good advantages make it suitable for any purposes of applications.