FDP-28 Horizontal Directional Drilling Rig 28 tons

The FDP-28 directional drilling rig is driven with full hydraulic system, propelled with its own crawlers. With reasonable structure, easy operation, high efficiency; main hydraulic components, motor and mud pump all selected and adopted from domestic famous-brand products as auxiliary equipments; with durable rubber belts of crawlers, the rig is suitable for moving in the city with no injury of pavement. And the rig could get on and off standard trailer on its own and it is quick and convenient for transportation and allocation. With low center of gravity, the rig is durable and reliable and in good stability with graceful structure. * The key parts and auxiliary components are selected and adopted from famous-brand products at home and abroad. * Adopted stronger power and low noise of Kummins diesel engine, the rig is more suitable to be applied for performance in the city. * With high torque and stable performance, the drill head is driven by four parallel motors in two speeds. * Adopting duplex motors speed reduction gear mechanism, the drill head is in the same capacity of feeding and pulling backward and in high and low, the two speeds. * With wired remote control, the track assemblies are easy to operate. And it is safer for getting on and off the trailer. * The mud pump is driven hydraulically with mechanical gear shift/stepless speed change. The displacement could be adjusted flexibly according to different geological conditions and performance techniques. * Adopted the rod, 73mm in diameter and 3 meters in length, the drilling tools are complete in matching accessories and could be produced in accordance with the requirement of clients unusually. * Equipped with hydraulic outriggers, the rig could be adjusted to balance and stability with convenience and easiness. * Equipped individually of mud processing unit, adopting injection and recirculation storage procession method, the efficiency will be increased and the intensity of labor will be decreased. The Main MachinePower of Engine132KW(177HP)@2200r/minMax. Push capacity280KN (62944 lbf)Max. Pull capacity280KN (62944 lbf)Rated Torque10000 N·M(7370 lbf·ft)Hollow Spindle RPMLower 0-56r/minHigh 0-112r/minFeeding Stroke3300 mm(130 inch)Diameter of Guide Hole130 mm(5.12 inch)Drilling Angle0°20°Pressure of hydraulic system20Mpa(2901 psi)Traveling speed2-2.6 km/h(6560-8528 feet/h)Structural Styleintegrated with rubber crawler and mud pumpDimension (L×W×H)5700×2100×2000 mm(225×83×79 inch)Weight8200 kg(18080 lb)Mud PumpSpecificationBW-250Max. Discharge250 L/min(66US Gallons/min)Peak Pressure10 Mpa(1450 psi)Mud Process SystemData of engine4KW(5.4HP) petrol enginePump parameterKGP30, 30 M3/h (1059 feet3/h)Mud processing capacity6 M3/h (212 feet3/h)Mud Tank2M3 (71 feet3/h)Drilling tools and auxiliary systemSpecification of Rod73×3000 mm(2.87×118 inch)Guide Bit130 mm(5.12 inch)Reamer325;400;500;600;720mm(12.8;15.7;19.7;23.6;28.3 inch)Distributor40T(88200 lb)TrackerOptional Part