EN733 electric water pump from China

Brief Description EAZ series are derived from EA series according to the European Standard BS EN733/ DIN24255 of performance. Pump shaft and motor shaft are close-coupled design. This way of coupling ensures the alignment of pump and motor. Pump impeller runs in good balance both dynamically and statically. Therefore pump would be kept very well in operation. EAZ S, EAZ B, EAZ N are designed to be driven by IEC standard motor, and EAZ S, EAZ B can be assembled separately without motor; EAZ E requires a special motor with extra-long shaft. Compared by EA pump direct-coupled with motor, EAZ series are much shorter in length thus takes less space to install; and they also can be adjusted into different performance levels through impeller trimming as EA. They are also used for pumping clean water or liquids similar to water, finding great application in industry, city water supply, construction, long-distance transportation, air-conditioning, firefighting and irrigation. Design Performance referring to BS EN733/ DIN24255 Standard Structure Horizontal, Axially End-Suction, Single-Stage, Single-Suction, Volute Casing, Back pull-out, Close-coupled Centrifugal Pump Flange DIN2501 (ISO7005.2 / GB/T17241.6 PN1.6) standard, ANSI B16.5 Class150lb optional Rotation Clockwise viewing from the drive side Material Casing Cast iron standard, Ductile Iron, Stainless Steel optional Impeller Bronze standard, Ductile Iron, Stainless Steel optional Shaft ASTM 420 standard, ASTM 304, ASTM 316, ASTM 1045 optional Shaft seal Mechanical seal (Carbon-Sic/Viton) Operating Range Flow Rate (Q) 2-555m3/h Head (H) 2-150m Speed 1450 or 2900 rpm (50Hz),1750 or 3500 rpm (60Hz) Working Pressure 10 Bar standard, 16Bar on request Picture of EAZ pump pump head Picture of our factory Our experimental installation