Emulsion White Wood glue

Features: 1) Technical index: a) Viscosity: 38,000Pa.s b) Solids content: 45% c) VOC: 13mg/kg d) Formaldehyde: <19mg/kg e) Benzene: <12mg/kg f) Toluene and dimethylbenzene: <253mg/kg 2) Application: a) Anti-fire plate / aluminum-plastic plate b) Furniture c) Wallpaper d) Carpet e) Rubber f) PVC / wood / floor / asbestos / plywood / polyester plywood / bamboo board 3) Characteristics: a) Speedy drying b) Long storage time c) Super adhering ability d) Easy application e) Freezing and rot-resistant f) Waterproof g) Environmental-friendly and nontoxic 4) Instructions: a) Clean: grease, smirch, rust, moisture of the contacted surface must be cleaned off. Surface of bamboo, leather or rubber must be matted. Rough surfaces must be smoothed b) Shake: shake well before use in order to obtain the best effect of viscosity c) Brush: brush or spray onto two surfaces need to be agglutinated d) It is optional to add water and dilute the product e) Agglutination: add pressure or tap for the super viscidity f) Application tools: brusher, roller, shaver, trowel 5) Storage condition: a) Keep out of the touch of children b) Store in cool, dry and ventilated place c) Store with airproof to avoid the dryness and hardness of the product d) Maintain under temperature of -20 45°C e) Period of validity: 12 months 6) Notes: a) Adhesive contains volatile solvent and is easy to burn. Please keep it away from fire and make sure the construction site is well ventilated b) During the application, the room temperature must be above 5°C c) If diluted with water, please finish the product within one hour before it goes bad d) This product conforms to China National Mandatory Standard (GB18583-2001): requirement of limits of harmful and hazardous material i) Formaldehyde: <19mg/kg ii) Benzene: <12mg/kg iii) Toluene + dimethylbenzene: <253mg/kg iv) Total volatile organic compound: <13mg/L