Elevator Bucket

Elevator Bucket1.Material: HDPE,Nylon 2.Use:Grain Processing, material handling 3.Type:Deep/Low/No Bottom Bucket,Split/Rice Milling/Inductive Bucket Type: 1.Deep Bottom Bucket 2.Low Profile Bucket 3.No Bottom Bucket 4.Split Bucket 5.Rice Milling Bucket 6.Inductive Bucket 7.Drying Bucket 8.DSeries Bucket Features: 1High intensity, wear-resistance, corrosion-proof, with longer life span than steel buckets. 2Light weight, extend the life span of the bucket, reduce the energy consuming of the elevators. 3Good pliability , low product damage percent of only 1. 4No spark caused in operation, avoid the possibility of dust exploration. 5Clean discharge, wide temperature applications. Technical Index: 1Method of Manufacture : Injection molded. 2Drilling: Free of charge. Special drilling is offered according to customers demand. (For detailed drilling specifications, pls refer to the related specification chart) 3Bucket Spacing : Minimum bucket spacing has historically been nominal projection plus+50mm 4Installation:Norway flat head elevator bolts, flanged bolt, sabre-tooth bolt, and belt bolt. 5.Sanitary Standard: FDAapprovalnon toxic and no causticity itselt, suitable for food industry. Physical and Chemical Properties of HDPE ADensity: 0.9350.960 g/cm2 BMechanical properties: Rupture strength: 900 N/cm2 Extensibility at break: 300% CCircumstance Temperature Range: -50+80 Heat-resisting Properties : Melting Point:136 Vicat Softening Point: 134 Brittle Temperature :≤-70 Coefficient of Heat Expansion : 1.5×10-14m/ Thermal Deformation Temperature : 85 DFriction Properties : Average rate of Friction : ≤1.32 Coefficient of Friction : 0.080.12 ESparks resulted form abnormal collision will not occur, nor does the electric discharge because of strong static electricity electrostatic charge caused by friction in the operation. Volume Resistivity : ≤7×1015Ω·cm Physical and Chemical Properties of Nylon: ADensity : 1.14g/cm2 BMechanical Properties : Tensile Strength:82.7Mpa xtensibility at break : ≥300% CCircumstance Temperature Range : -40+105 Heat-resistance Properties : Melting Point: 255 Brittle Temperature : -80 Coefficient of Heat Expansion : 7×10-5m/ Thermal Deformation Temperature : 255 (0.5×106Pa) DVolume Resistivity : 1×1015g/cm2 PU buckets should not be used on the following: 1.Materials over 100 2.Large dense material such as gravel and ore over 3/8" diameter. Ifyou needspecific product standard, please contact us at any time