Power (W) |
3000 |
Voltage (V) |
380 |
Place of Origin |
Guangdong China (Mainland) |
Brand Name |
WEIJIYE |
Model Number |
PC-50 |
weijiye electro motion flour mixer has three models: PC-15, PC-25, PC-50 type. It is a kind of flour blender. It is suitable for the enterprise and institution dining room, hotel, Big, the cafe, factory, school, army, etc. This device is reasonable in design, easy to operate. It can work of kneading dough, With high efficiency. The parts of this machine part are conducted by stainless steel or electroplates to accord with the hygienic requirements. Technical Parameter ModelPowerLoad weight (normal)Load weight (fine)volumeExternal dimensionPC-151.1kw53.5kg58.5kg15kg600*500*750mmPC-252.2kw76kg85kg25kg750*500*750mmPC-503kw123kg128kg50kg750*530*900mmWork time5-20 minutesRotational speed / minute3040Voltage220V380V Precautions 1\ Should check the machine before using whether there are barriers partly to each rotates, Whether it is unblocked to lubricate, one is cleaned while fighting 2\ Check whether the voltage to conform with this machine, the safe ground wire is reliable, And install and leakage switch. 3\ Mixer which is worked under 220v voltage, should not exceed ±5% of the rated voltage t. When using the voltage of power to be higher than 230V or lower than 210 Vs, Should adopt the voltage regulators or stability device of rated voltage which is more than 10% rated voltage greater than this electrical machinery and supply power to use. 4\ Connected with power, pay attention to direction with unanimous to turn to the arrow point. If can replace two among them of the power when it is reverse to rotate the direction and arrow point, Three-phase 380V can make the direction normally. 5\ When run well after test the machine, put flour into surface mix in fighting (water is depend on flouring). After mixing evenly, turn off the power, draw back and orientate the lock, Make the case body can take out the dough to have a down dip. (No putting hand into surface when working) 6\ After working, Should clean the machine, cover the box to assure the hygiene, and add lubricating oil in rotational parts for easy to use next time. Be careful: This utensil can’t have water nozzles that are washed directly.