DVL-AJ10IC access control system

DVL-AJ10IC access control system Functional Properties of access control system1.Identification distance of our RFID Tag is more than 20 meters2.Access-type work3.The IC Dual tagis standby when not visited4.Strong signal penetrability without impact from cars' anti-explosion metal film of our RFID active tag5.Small and smart active tag6.With special holder affixed to the back of rear-view mirror7.High-speed identification without affect from the vehicle speed8..Be compatible with IC(Mifare1) card. After Inserting the it,DVL-AJ10IC rfid tagreads its ICProduct Application of access control systemEntry and exit intelligent management system in parking management systemNon-stop counting system for vehicleNon-stop Attendance system for busElectronic road test for driving systemTechnical Parameter of access control systemIdentification Distance of RFID tag:More than 20 metersIdentification Angle of RFID tag:80 degree from reader's frontageReceiving Channel of RFID Tag:38KSending Channel of RFID tag:433MCommunication Encryption of RFID tag:Based on Bluetooth encryption algorithmWorking Voltage of RFID tag:2.5 +3.6V DCStandby Current of RFID tag:10uABattery Standard of RFID tag:2045/3V 2 pieces button celltag Dimension:90*57*10(mm)tag Colour:GrayPackage: 100PCS/CASEWork procession of access control systemDVL-AJ10IC access control system, also known as the two-piece tag,is used withMifare card. When use DVL-AJ10IC rfid dual tag, insert the IC card into the corresponding slot of the DVL-AJ10IC rfid dual tag. Thedual tagfirst verifies the IC card and then works in three ways. Firstly, the RFID dual tag directly sends the IC card’s internal code. Secondly,the RFID dual tagsends the new internal code which is combined by the IC card and the internal code of itself. Thirdly, the RFID dual tagsends the internal code of IC card and the internal code of itself.DVL-AJ10IC RFIDdual tagis mainly used in the Entry and Exit parking system and the vehicle dispatch of government,etc.