DOWN HOLE MOTOR

Downhole motor Downhole motor is a kind of drilling tools developed for converting hydraulic energy into mechanical energy through power section which is made up of a stator and a rotor. The motors are usually divided into two kinds, single lobe (1/2) and multi lobes (N/N+1) motors, according to the quantities of the lobes of the stator and rotor. Generally speaking, for motors of the same length of rotor/stator section, the more the lobes are, the higher the output torque is, vice versa. The motors are usually used together with cone bits, diamond bits and so on in drilling operation, such as directional and vertical drilling, horizontal drilling, correcting deviation, coring, reaming, sidetracking, etc. Our downhole motors may also be equipped with extended power section. Comparing with common motors, they are greatly increased in output torque and power, which help to increase penetration rate markedly. Our downhole motors enjoy high prestige in the North America market because of their prominent performance and more than thousand hours working life. Downhole motor adjustable bent housing is optional. It can easily adjust the bent angle from 0 to 3 degrees (between 0 to 3 degrees) in the rig floor without shim. The angle is directly pointed to the high side of tool face. Our downhole motor has independent intellectual property rights like anti-friction connecting rod. It obviously improves the capacity of the motor and also increased the running time. For more details and more products, please feel free to contact us.