DIN Gate Valve

DIN Gate Valve, Flanged Ends,Rising Stem,OS&Y,B.B.,DIN Flanged End conform to DIN2543 or EN1092-1,Design and Manufacture Standard:DIN3352,Pressure:10bar, Body/Cover: Cast Carbon Steel GS-C25,Trim 1,Size:150mm(6”)Applicable Standards:-Design and Manufacture Standard: DIN3352-Inspection and Test Standard: DIN3230, EN12266-1-Pressure-Temperature Rating Standard: ASME B16.34-Face to Face Dimension Standard: DIN3202-F4, EN558-1-End Flanges Dimension Standard: DIN2543, EN1092-1Design Description:(1) Rising Stem - easily visible open-close indication.(2) Grease Fittings –yoke sleeves equipped with fittings to minimize wear and operating torque.(3) Swing Bolts – facilitate easier maintenance and packing replacement.(4) Stuffing Box- optional lantern rings and grease injectors are available for critical service(5) Backseat - machined bonnet stem bushing provides back-up stem seal.(6) Bonnet Joint - joint design varies with ASME class rating.(7) Body - full ported, heavy duty body with API 600 wall thickness for maximum service life.(8) Seat Rings- separate heavy duty, full ported rings for easy maintenance.(9) Handwheel - large handwheels for easy operation. Also available with gearing, motor actuators, or cylinder actuators for more difficult services.(10) Yokesleeves -furnished in ductile Ni-resist or aluminum-bronze to reduce operating torque.(11) Gland - two-piece gland/gland flange is self-aligning to eliminate stem damage from cocked gland.(12) Stem - all WIN-WIN wedge gate valves are provided with upset forged T-head stems. By forging the T-head, the stem at the stem-wedge connection is strengthened. This design also allows the wedge to self-align, eliminating the possibility of a bent stem jamming the wedge.(13) Wedge –Solid wedge for gate valve with NPS<2inch,gate valve with other sizes, WIN-WIN use a one-piece flexible wedge, slots are machined on both sides of the wedge to allow it to travel correctly in the integral cast body guides. The wedge seating surfaces have been accurately machined,grind and lapped to a mirror finish to prevent leakage and eliminate galling for maximum shutoff.(14) End Connections - flanged end options are raised face smooth finish or ring type joint. Besides, BW end is also available.Suitable Medium: Oil, Water, Gas etc.Other type of DIN Standard Gate Valve could be available.We also accept all kinds of OEM jobs.