Digital 2 Phase Stepper Motor Driver DM245M

Power-Voltage-FrequencySingle-phase DC24V DC50VPower-Allowable Fluctuation of VoltageWithin ±15%Power-Allowable Fluctuation of FrequencyWithin ±5%Control ModeSine Wave PWM control,current controlDynamic BrakeBuilt-inProtection FunctionOver current, overload, driver overheating, short circuit between phasesMax Pulse Frequency Input200KppsMicro StepsMax 60000 pulse/RCooling MethodAir coolingTemperature0°C +55°C Storage -20°C +65°CHumidityLess than 90%RHSurrounding EnvironmentIndoor, no corrosive gas, flammable gas, and dustAbove Sea LevelLess than 1000mVibration5.0m/s²Weight0.35Kg FunctionNoteSelf-test functionDriver tests self status when powered up.Micro steps changeHigh/low subdivision can be changed freely.Command pulse choosing(single/double pulse)Two pulse input methods for optional.Change Speed SmoothlyGuarantee motor run smoothly when external pulse changes dramatically.Phase Memory FunctionAutomatically memorized motor phase if pulse stops 3 seconds.Internal pulse controlNo need to input any signal but directly use driver to run stepper motorOverload functionWith overload function when start/stop the driver.Micro steps settingPulse input can be reduced or enlarged X times.Status displayDriver status can be shown on the LED display.Alarm functionGive the alarm if driver or motor works abnormally.PC communication485 COM to PC or other drivers. It supports PC to connect up to 32 driversSpeed adjustmentConnect R to maintain motor running speed.Speed modeSet up any speed and enter start/stop switch value to control the motor.