Diesel generator set

Our diesel generator sets meets the following standards: GB/T2820, GB1105, YD/T502, ISO3046, ISO8525, ISO8525-3-5-6. Factory Test Each our generating sets must be got through 1 hour load test for running 0%, 25%, 50%,75%, 100% and 110% load before dispatch, All protective devices, control functions are simulated and it°s system checked, proved and then passed for dispatch. A test certificate can be provided upon request. MAIN SPECIFICATIONS OF GENERATOR SETS DIESEL GENERATOR SETS GENSET MODEL NOS. LG8.8YM Rated speed / frequency 1500 rpm / 50 Hz Prime output KW/KVA 6.4 / 8 Standby output KW/KVA 7 / 8.8 Voltage, Phase and wire 400/230V, 3 Phase and 4 Wires 0.8 lagging Rated power factor Maximum output current(A) 12.7 Genset type Open type Silent type Dimension(L*W*H) (mm) 1580*810*930 2000*740*1150 Weight(kg) 437 637 Rating Definitions (Operation at Altitude °1500m, Ambient temperature ° 40 ). ° If altitude higher than 1500m, each 100m will cause additional de-rating 1%. Prime Power These ratings are applicable for supplying continuous electrical power (at variable load) in lieu of commercially purchased power. There is no limitation to the annual hours of operation and this model can supply 10% overload power for 1 hour in 12 hours. Standby Power These ratings are applicable for supplying continuous electrical power( at variable load) in the event of a utility power failure. No overload is permitted on these ratings. The alternator on this model is peak continuous rated (as defined in ISO8528-3) at 27° DIESEL ENGINE ENGINE BRAND Engine model 3TNV76