Diesel generator set (Deutz, 25-128kw, watercooled

Cummins diesel generator set (500kw, watercooled, Stamford brushless DC alternator, with ATS) 50Hz, 1500rpm, 400V-230V, 0.8 power factor Three phase four wire Engine model TD226B-3D Engine characters Water-cooled, inline, direct injection, Humid cylinder Constant output (KW/KVA) 45/56.25 Standby output (KW/KVA) 49.5/61.9 Aspiration Turbocharged Bore(mm)*stroke(mm) 105*120 Cubic capacity (Liters) 3.12 Piston speed (m/s) 6m/s Compression ratio 16:1 Machine governor % Electronic governor 1% Acoustic pressure(dBA) 110 Lube capacity 7.25 Cooling system volume 15.5 Combustion air flow 2.8m3/min Exhaust gas flow 6.3m3/min Rating fuel consumption (L/h) 9.7 Alternator model BCI184J Continuous output (KW/KVA) 34/42.5 Power efficiency 86% Voltage regulation 1% Excitation type Brushless Insulation class H Supply standard collocation A. Diesel engine with all accessories, 3 filters and electic systems B. Alternator C. Steel structure D. Fan and water tank cooling system E. Flange connector F. 12/24V starting motor and charge engine G. Air cleaner, fuel cleaner, oil cleaner H. On-board control panel I. MCCB air conservation switch J. 12/24V starting accumulator and battery line K. set shock absorber L. High-efficient silencer Diesel engine A. More than ten hours operation base tank B. Deepsea key start controller (Auto start is optional) C. Open frame and soundproof canopy D. Heavy duty industrial diesel engine a. compact size b. suitable for long time operation c. low maintenance cost Alternator A. Optional permanent magnet generator system provides constant excitation under all conditions. B. Easy paralleling with mains or other generators ,standard 2/3 pitch winding. Avoids excessive neutral currents. C. Dynamically balanced rotors with sealed-for life ball bearings and single construction. D. Class "H" insulation system E. Wide range of flanges adapters and disc couplings F. Conforms to all leadiing industrial and marine standards