Defibrillator

Fukuda Denshi FC-1760 Defibrillator (AED) / Monitor The portable defibrillator / Monitor FC-1760 goes everywhere with color LCD monitor that allows ECG monitoring as required. Package is built more compact and lightweight, thereby allowing the nursing staff to use it conveniently in emergencies. Features: 1. 5.5 inch color LCD for clear information. 2. Optional telemetry transmitter enables both ECG and Respiration monitoring. 3. Voice Guidance provides the instrument status. 4. Built-in recorder automatically activated upon energy discharge and/or alarm. 5. Contract Resistance Indicator on Paddle for efficient energy discharge. 6. Synchronous / Asynchronous mode selectable. 7. Rechargeable Battery or AC power operation. 8. Three (3) steps for simple and quick operation. One: select energy level Two: energy charge Three: discharge Specifications: Defibrillator: 1. Output energy levels (with 50 ohms load): 2, 3, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200, 300, 360 joules (with external paddles); 2, 3, 5, 7, 10, 20, 30, 50 joules (with internal paddles). 2. Charge times: Within 10 seconds to 360 joules on AC operation; Within 12 seconds to 360 joules on DC operation. 3. Discharge modes: Synchronous and asynchronous. 4. Discharge: Single-phase pulse (with 50 ohms load). 5. Peak voltage: 5kV max. (with 100 ohms load). ECG: 1. Leads: I, II, III (ECG lead), paddle lead, telemetry lead. 2. Time constant: 0.3 seconds. 3. Sensitivities: 1/4, 1/2, 1, 2, 4cm/mV manual or automatic selection. Monitor: 1. Display: 5.5 inch LCD. 2. Display mode: Non-fade, stationary; Cascaded ECG or 2-channel (ECG and Respiration with LX-5120) 3. Sweep speed: 25mm/sec. (ECG), 8mm/sec. or 25mm/sec. (Respiration) 4. Display time: Approx. 8.8 seconds 5. Alarm setting limits: 15 to 300 bpm (HR). 6. Alarm indication: Audible and visual Recorder: 1. Recording method: Thermal dot array method. 2. Paper speed: 25mm/sec. 3. Recording paper: 50mm x 30m 4. Print items: Year/month/day, hour:minute, ECG lead, set energy level, output energy level, sensitivity, heart rate, syncronous point, discharge point. 5. Recording modes: Manual (approximately 8.8 seconds delayed waveform), automatic and freeze waveform recording. Telemetry: 1. Transmitter: Optional LX-5120. 2. Receiver system: Double superheterodyne with crystal controlled synthesizer. 3. Antenna: Built in (whip antenna). 4. Receivable parameters: ECG, Respiration. General: 1. Protechtion against electrical shock: Class I; Type CF (with ECG lead, internal paddles), Type BF (with external paddles). 2. Battery charge time: Approx. 150 minutes. 3. Battery operation time: 1 hour when operated for monitoring purpose only. 4. Power requirements: AC90V to 240V, 50/60Hz; 170VA max., or 12V DC rechargeable battery. 5. Dimensions: 33.0(W) x 43.0(D) x 12.0(H) cm. 6. Weight: Approx. 8.2kg (incl. external paddles TE-300).