DECER Doctor Blade S50

DECER Doctor Blade, can be applied to medium- and high-speed photogravure machines of all kinds, is made of high quality steel by using high precision production technique. is manufactured with steel of high standard, which is supplied by a famous Sweden steel strip supplier and certified according to the ISO 9001. three major factors are crucial to the quality of Doctor Blade, that is, wear resistance, elasticity and good ink-scratching effect. Decer doctor blade has great performance in all these three factors.1. Wear resistance: The surface of the electro-engraving cylinder is plated with a layer of chromium and its hardness is 800HV. Whether the blade on the machine is too hard or too soft, it will bring negative effects. Therefore, DECER developed a blade of proper hardness (580HV), so that it will not damage the rolling cylinder and increase its own wear resistance. Using the blades from DECER, customers can reduce the number of times to stop the machine to change the blade. In that way, production efficiency is increased. 2. Elasticity: Since there are sags and crests on the surface of the electro-engraving cylinder, blade on it will bounce continuously under high running speed. Blade with low elasticity is unable to restore to its original position quickly and will consequently affect the quality of next ink-scratching process. DECER Doctor Blade, characterized with elasticity, will not let that happen. 3. Good ink-scratching effect DECER blade adapts arc-shaped blade edge. During operation, no matter it shakes or bounces on the printing cylinder, DECER blade will contact the cylinder surface very closely and leave no superfluous ink on the non-printing area. Package Design: Each roll of Decer doctor blade is packaged in a specially-designed Decer doctor blade box, which helps immobilize and protect the doctor blade inside. The slot on the box corner facilitates the use of doctor blade and the unique hollow design makes the product easy to carry during portage and shipping. Product Description: Grade: 20C/Ck101, cold rolled, hardened and tempered, surface polished white Tensile Strength: 2050 (+/-50) n/mm2 Hardness: 580-600Hv Straightness: 0.5mm/3m Tip thickess: 0.07mm/0.08mm/0.09mm/0.10mm Tip width: 1.3mm/1.4mm/1.5mm/1.6mm Blade thickness: 0.152mm/0.203mm Chemical Ingredient: Chemical composition C Si Cr Mn Amount(%) 1.00 0.20 0.36 0.45 Specifications: Product Series DimensionsLength per Coll(m)S2020mm*0.152mm100S3030mm*0.152mm100S3535mm*0.152mm100S4040mm*0.152mm100S5050mm*0.152mm100S6060mm*0.152mm100T2020mm*0.203mm100T3535mm*0.203mm100T5050mm*0.203mm100T6060mm*0.203mm100 After-sale services: When DECER Doctor Blade is developed and made, we emphasize the three critical factors that affect the quality of blade: wear resistance, elasticity and good ink-scratching effect. If you still have questions in operation after reading this manual, please dont hesitate to contact your DECER suppliers and they will surely offer you the best after-sale service.