DC Drive For Packing Machine

DC Drive For Packing Machine Product performance 1. The mechanical characteristics of hardness, static error rate of 1%. 2. Wide speed-regulating range (0 - max). 3. Rapid dynamic response process. 4. Automatic smooth transition process during acceleration or deceleration. 5. Better excavator characteristics, can limit overload current to set value current. 6. High reliability and compact structure, high performance-price ratio. Product features 1. SCR dc drive.2 2. Speed regulation ratio 1:100 (Open loop), output voltage (0-set value) 3. Big starting torque at low speed. 4. Dual closed loop PI adjustment (Current and Voltage) 5. Current setting, current limiting protection and overcurrent warning function (If the preset current value is exceeded, the driver stops output automatically.) 6. ACCEL & DECEL can be set. 7. Upper speed limit and Lower speed limit can be set. 8. Fine following performance; immediate dynamic response 9. Standard signal interface (apply to D/A signal, 0-5v,0-10v) 10. Keyboard lock-up function. Usage The equipments have been widely used in industries like papermaking and printing, textiles printing and dyeing, welding and cutting and industries producing testing machine, instructional apparatus, NC machine, fiber-optic cable equipment, packing machinery, electrician machinery, foodstuff processing machinery, rubber machinery, biological equipment, printed circuit boards equipment, laboratory equipment, light industrial machinery, conveying equipment, rolling stock, medical facilities, communication equipment, radio detector equipment, satellite earth receiving system, etc.. Product Characteristics Main Parameters: 1. Input Voltage: AC 220V2. Output Voltage: DC 0 110V3. Output Current: DC 4A4. Rated exciting voltage/current: 110V(DC)/3A5. Given signal mode: 0 5V or potentiometer 10K/2W6. The environment temperature:-10ºC +60ºC7. The environment Humidity: ≤ 80 RH relative humidity (Non-condensing) Potentiometer Adjustment Instructions: 1. Torque Compensation Adjustment: IR COMPIR COMP potentiometer is used to keep the motor speed constant when working with different loads.2. Current Setting/Limiting Adjustment: TORQUEThis potentiometer adjustment is intended for setting/limiting the max output current of the driver board according to the rated current of the motor. Through adjustment of this potentiometer, the max output current of the driver board can be increased from 120% 200% of the rated motor current.3. Soft Starting Time Adjustment: ACCELThrough adjustment of this potentiometer ACCEL, the upward slope from the starting speed to the preset speed can be defined (i.e. the time required to reach the preset speed, optionally between 0-10s).4. Soft Stopping Time Adjustment(inner fixed): DECELThrough adjustment of this potentiometer DECEL, the downward slope from max speed to the minimum speed can be defined.5. Maximum speed limit: MAX SPDAdjust the speed potentiometer to the maximum, and then adjust MAX SPD potentiometer to determine the maximum speed of motor.6. Adjust the speed potentiometer to the minimum, and then adjust MIN SPD potentiometer to determine the minimum speed of motor.