D00-140E Aluminum Aluminum Blister Packing Machine

1. Simple Introduction: The product uses the composite Aluminum film as material which has best performance of seal, proofing moisture and light, and uses special mould to cool-form. It is renewed packing equipment in pharmaceutical industry. The machine has two functions. When it changes mould, the machine can pack the object not only with Aluminum-Aluminum, but also with Aluminum-Plastic. 2. Main Technical Data: Model: DPP-140E Punch Speed: 10-40time/min Max. Shape Area: 170*110mm Travel Range: 40-120mm Compressed Air: 0.4MPA-0.6MPA Power: 380V 50Hz 4Kw (Depend on different countries it can be changed.) Wrapper Specification: PVC: 140× (0.15-0.5) PTP: (0.02-0.035)*140mm Composite Aluminum film: (0.11-0.15)*140mm Overall dimensions (mm): 1600×650×1400 Weight (kg): 800Kg 3.Feature: Travel scope can be adjusted. Mould is located by locating groove which makes it easy to change mould. The machine is using Cold Press Forming (Punch Forming) to Tropical Aluminum Foil. The material is fed automatically. The mould and feeder can be designed as user’s requirements. Speed is shifted by step-less transducer. Adopt the interface of human-machine and PLC programmable controller, it can synchronize accurately. Adopt the equipment of trace pressing, batch number printing and scarp-collecting. Step motor to tow wrapper, never waste material and time of adjusting. The heating moulds will automatically separate when the machine stops, which contributes to protect the material between them and extend the machine’s life. Use Dust Collector for clean the tablets and collect powder and dust on the medicine.