Cutter suction dredger

1,Principal Dimensions and Characteristics Length Over All:21.3m Hull length:15.5m Hull width:4.6m Hull depth:1.6m Draft:1.05m Ladder length:11.6m Digging depth:9.0m Discharge distance:1000m 2,Main Engine Make/modle:Weichai Diesel 6160 Power:330kw 3,Generator Generator:Weichai Generator 24kw 4,Dredging pump Capacity:200m3/h Pump Suction Diameter:10inch Pump discharge Diameter:8inch Maximum Diameter of Flowed Partice:7inch 5,Cutter Cutter Diameter:1100mm Cutter Power:50kw Cutter Speed: (Maximum)0-35RPM 6,Ladder Hoist Winch Line Pull - Second Layer:4,932 kg Line Speed - Second Layer:0--31.5 m/min Wire Size:18mm Ladder Hoisting Speed:14.5 m/min Shaft Power:21 kW 7,Direct Line Swing Winches (2) Line Pull - Second Layer:2,968 kg Line Speed - Second Layer:27.5 m/min Wire Size:16mm Drum Capacity:96.5mm 8,Spud Winches (2) Line Pull - Second Layer:7,430 kg Line Speed - Second Layer:7.4 m/min Wire Size:16mm 9,Spuds (2) Spud Outside Diameter:325mm Spud Length:13m A cutter-suction dredgers' suction tube has a cutter head at the suction inlet,to loosen the earth and transport it to the suction mouth. Superiority 1.Manufacturing the machine as the client requirement 2.Good instruction and accessories 3.Operate easily and strong to adapt. 4.Professional transportation 5.Good after-service 6.Reamer will twist loose sand, then mud pump sucked 7.High quality,save lobor 8.The cutter can also be used for hard surface materials like gravel or rock.