CTF-Waterproofing adhesive

CTF-Waterproofing adhesiveproduct introduction:The product is developed in the laboratory by the company. It has high strength, high bond performance, two component flexible waterproof special binder, is modified by polymer additives, dry-type cement-based bonding materials and a special deployment of high ratio of polymer latex composition, especially for bonding water absorption<1% of ceramic tiles, granite, glass mosaic and other demanding materials. This product has the following characteristics:l high bond performancel good water resistancel good alkali resistanceApplication:grade ceramic tile, glass mosaic, etcConstruction points:1,the base surface must be dry, clean, no oil and so on. The base surface of porous or too hot, the application of water based surface slightly moist, but not soaking the tile.2,use power: liquid=3 bags(25kg/bag):1barrel(20kg/barrel), the product should be used in 90 minutes.3.use knife to smear the product to the back of the tile, press it to the right place. 4.ground construction should use 10mm×10mm×10mm knife to smear, wall construction use 6mm×6mm×6mm knife to swear. 5.After tile adhesive bonding layer thickness of not less than 1.5mm; gap between the tile should not less than 1.5mm.Notes:1.construction under5 35°C. 2.Don’t do the construction outdoors in the rainy dayPackage and storage:3bags of powder (25kg/bag), 1 barrel (20kg/barrel). Stored in a cool dry place, unopened product can be stored for 6months.