CTF tile adhesive

CTF tile adhesiveproduct short introduction:The product is a cement-based dry powder type bonding material, it has excellent performance and good construction, it can bond all kinds of tiles, mosaics and so on. The products has the following characteristics:l high bond performancel good water resistance and alkali resistancel can heat up to 150°C Dosage reference: 3mm thickness by bonding dollars, with about 4kg/m2Construction points: 1.The base surface must be dry, clean, no oil. If the temperature was too high, you can use water the surface ,but not soaking the tile2.Put the product into water, stir into a thick past. Water : cement=1:4, after mixing of the product ,it should be used in 3 hours. 3.use knife to smear the product to the back of the tile, press it to the right place. 4.ground construction should use 10mm×10mm×10mm knife to smear, wall construction use 6mm×6mm×6mm knife to swear. 5.After tile adhesive bonding layer thickness of not less than 1.5mm; gap between the tile should not less than 1.5mm. Notes:1.construction under5 35°C. 2.Don’t do the construction outdoors in the rainy dayPackage and storage:This bag is 25kg. Stored in a cool dry place(5 35°C), unopened product can be stored for 12 months.