crystal resin adhesive

Features The product is combined with two liquid of A and B, the curing speed is fast and the bond strength is high. It applies to inlay copper into stone and mend crack. Widely be used for bonding of all kinds of metals, stainless steels. T magnet irons, stones, acrylic plastics, ceramics, electric machine and so on.Instructions 1.Mix A and B by weight ratio as 1 to 1, spreading the mixture on the surface of which to be bonded first, then close up and press the two working pieces need to be bonded. Another method is coating separately the surface of two to be bonded with A and B, then close up and press.2.The combination of A and B must finish bonding and orientation in 5 minutes. It reaches its highest bond strength after 24 hours.Precautions 1.Don`t mix the remaining glue mixture back into the tank.2.Stored in a shady and cool place and keep it away from heat and pyrotechnics, seal it tightly up after using. The service life of the original package is 8 months and it can be continued to work if it meets a criterion after proof-testing which is exceed time limit, but do not use again if it comes to caking.3.Away from children! Go to see a doctor immediately if it is splashed into eyes careless and rinse with plenty of soapy water if splashed on skin.