Copper Rod Continuous Casting and Rolling Line

Composition It is made up of the melting shaft furnace & holding furnace (or reverbertory refining furnace), five-wheel casting machine, automatic shearer, straightening machine, polishing machine, rolling mill, lubrication system, cooling and de-oxdation unit , take-up device and electric control system. Features This copper rod continuous casting and rolling line takesbothcopper scraps orcopper cathode as the feedstock to produce copper rod in 8mm diameter, with annual capacity varying from 6,000 to 12,000 tons. Accroding to the different kinds of production material(copper cathode or copper scrap),we can equip with different kinds of copper treatment furnaceto produce ETP rod and FRHC rod separately.The continuouscastingmachine has been awarded the patent right(Patent NO. is ZL200720079542.8). Crystallizing wheel is in type of "H", on every side of which there is an adjustabe nozzle sparying water to ensure the crystalof the cast bar close andequal. The pneumatic system is used for tightening steelbelt,easy for adjusting.The continuous rolling machine has a function ofautomatic feeding and rods stacking stop. With an unique rolling method conbining 2-high rolling stand with3-high rolling stand, the copper rod is provided with a good mechanical properties.The main transmission system is in type of DC motor full-digital speed adjusting. By adopting PLC and man-machine interface, it can control the host and the assisting parts in type of completeline interaction. Also it can check and display the running parametersof machines aswell as indicate thebreakdown.UL+Z- 3500/8+255/14 Outlet rod dia.(mm)Φ8.0Φ12.5Φ16 Φ20Crytallizing wheel dia.(mm)Φ1910Casing bar section(mm2)3500Production capacity(t/h)16-20Final rolling speed(m/min)12No. of rolling stand14Coils weight(t) 2-5Main motor480KW 750r/minRoller's dia.(mm)Φ255