Computer control 2 Ply Corrugated Cardboard produc

(PLC Controlled) Rotary Shear Cut-off and Receiver (2ply) This machine is usually mated with the production line with bridge,in front the inlet of the machine, the flute of the 2 ply single face cardboard is facing ground side.This machine is consist of several parts: a.Slitting parts: With 4 (or 3) pieces of slitting blades, might slitting 2 ply single face cardboard lengthways into 3 (or 2) outs. b.Rotary cut off: the cut knife cut transverse. c. Additional conveyor bed with narrow belts: help for stable conveying. d.Wide Conveyer and receiver. 1. Special structure design, the intensity of the wall and the base of the machine is very good for stable running. 2.High precision and high hardness abrasive gear, is high speed endurance and long natural life. 3.Special cutting knife is suitable for high speed cutting, the cutting edge of the paper cardboard is unknit and without paper burr. 4.High precision of knife shafts, the design of knife rest, quite calm to cut at high speed. 5.Special structure design of blade adjusting or changing: very convenient, easy, fast. 6.The blade and blade seat of slitting or shearing edge blade, is special designed, is very convenient to adjust or change blades. 7.Each of the elements of the machine, is strictly quality controlled and managed, modified by precise instrument during the installation before leaving factory. 8.The characters of this machine: well to use, well endurance, long natural life 9.After strict Industry class computer test, No. 1 of the Quality, Stable, long natural life. 10. Industry class computerPLC is applied, OMRON of Japan, the system is passed by test of temperature, humidity, vibration, and with the design of non break of electric power on line(no influence while temporary break of electric power), and even have the ability of overcoming unsteadiness of electric power in the factory environment.