Compression Testing Machine (1000KN/2000KN)

STYE-1000/2000 Compression Testing MachineComplies to ISO 7500-1 ASTM E4, CE certifiedApplication: the compression testing machine is to perform compression tests uponbuilding materials including concrete, cement, airbrick, fire proofing tile, engineering ceramics and building stones.Technical specification:ModelSTYE-2000Load Capacity2000KNPrecision±1%Max. vertical clearance (mm)310Max. horizontal clearance (mm)260Size of the bearing plate (mm)320×260Max. ram travel(mm)50Diameter of the piston(mm)250Rated pressure of the hydraulic pump40MpaRated power750WWorking voltage380V±10% or 220V±10%Dimension(cm)95x42x116Weight(kg)800Choice of standard specimens:100, 150 and 200mm cubes150x150x550mm and100x100x100mm concrete beams40x40x160mm mortar prism70.7x70.7x70.7mm mortar cubesSpecimens of arbitrary sectionFeatures: 1. Hydraulic loading, force measured by dynamometer;2. Digital readout and microprocessor control, data is calculated automatically, test results printable,max load memorized and power off protection;3. High-precision sensor ensure reliable and consistent test results, digital display and automatic printing of test results.4. The lower platen marked for the location of cube and cylinder specimens, the ball-seated upper platen is able to tilt in all directions.5. Rigid frame provides maximum stability, columns and bearing plates are very thick, so weight of loading frame is 200kg heavier than similar products from other manufacturers.Package: Packed in standard wooden case.