Combination Digital meter (LED display)

DIGITAL INSTRUMENTSFulfill Following StandardsIEC51, IEC359, IEC348CasingsHigh grade heat-resistance engineering plastic ABS material to support the casing.Protection gradeUnder normal operation, the instrument cases have a protection grade of IP54Operating EnvironmentPlaces free of gas corruption with temperature of -10 +50, and relative humidity≤85%RHAccuracy indexAll Dixsens Digital instruments accuracy index is 0.5, Digital instruments do not contain moving parts, so the accuracy is unaffected by the mounting position.Accessories1. Two clamping kits for flush mounting, user can complete the installment easily without tool.2. A complete operating instruction manual included with each meter.Mode of DisplayDisplay mode of DX Series: Ultra bright red 4 bits LED and nixietube Max. 9999Auxiliary Power SupplyAC220V±10%, 50/60Hz, 110V or 380V option (Special Voltage upon clients request)Panel Dimension(mm)Case Dimension(mm)Hole Cutout Dimension(mm)WidthHeightWidthHeightDepthWidthHeight9696919180929272726767806868964890441009245484844441004545Alarm FunctionHigher and lower limit alarm displaying character HHHH orLLLL, Alarm time can be set from 0 second to 60 seconds, and alarm limit (High and low limit value can be setted by user.Combination programmable digital instruments are advanced panel meter capable of simultaneously displaying independent variables, making three instruments (at least) in one. This solution allows the user to save panel space and reduce wiring and accemble labor, maximize panel space, Normally, In 3-Phase AC power systems. Combination programmable digital instruments can replace several conventional meters.Combination Digital Meter: There are3 different construction sizes for applications, below is selection form:TypeFrame Size(mm)ModeDisplay RangeClass IndexPCS./CTN.CombinationDigitalMeterfor U-I-F(Single Phase Purpose)DX-Z96UIF96X96X/5A0 9999A0.536DX-Z72UIF72X72X/5A0 9999A0.536DX-Z48UIF48X48X/5A0 9999A0.536Note: Mode X/5A or X/1A can be setted via buttons on the panel, also current ratio can be programmed any value which in display range.Feature:4 bits LED and nixietube display for current and voltage and frequency. Current ratio can be setted via buttons on the panel.