Cold Applied Tape

Inner Tape(Cold Applied tape, Cold applied tapes, Cold Applied Tape Coating) Systems Description: The Inner Tape T-100 series is Cold Applied Tape Tapes Coating systems for the anticorrosion of underground, underwater, and overhead pipelines.Butyl RubberAdhesive is a key in ground performance characteristic coupled with the low and high density polyethylene backing. This kind of tape can be applied by hand or with a wrapping machine. Product Advantages; Conformable to irregular shapes.No release liner. Established in ground history. Complies with AWWA (American Water Works Association) C-214 standard.Compatible with general coating systems. T-100 Inner Tape (Cold Applied tape, Cold applied tapes, Cold Applied Tape Coating)series Coating Systems with AWWA C-214 Standard: Type of Inner Tape (Cold Applied Tape): T-140 T-150 T-165 T-180 T-1100 T-1130 Thickness: (ASTM D 1000) Total mm mil mm mil mm mil mm mil mm mil mm mil 0.38 15 0.51 20 0.64 25 0.76 30 1.02 40 1.27 50 Film 0.25 10 0.30 12 0.33 13 0.38 15 0.51 20 0.64 25 Adhesive 0.13 5 0.21 8 0.31 12 0.38 15 0.51 20 0.63 25 Tensile: 27 lbs/in 31 lbs/in 34 lbs/in 39 lbs/in 53 lbs/in 66 lbs/in Length: 60 Meter 50 Meter 40 Meter 30 Meter 25 Meter 20 Meter Width: 2, 3, 4, 6, 9,12 Colour: Black Elongation: 300% Peel Adhesion to Prime Pipe: (ASTM D 1000) 165 oz/in, 18N/10mm Cathodic Disbandment: (ASTM G8) 0.25 in radius 6.4 mm Water Vapor Transmission Rate: (ASTM F1249) 0.2g/100in2 /24h, 0.3mg/cm2/24h Water Absorption: (ASTM D570) ≤ 0.1 Volume Resistively: (ASTM E257) 2.5 X 1012 ohm·cm Dielectric Strength: (ASTM D 149) 40 KV Temperature Range: (Normal in Ground Service) -30 to 160 oF, -34 to 71oC