Closed Loop Solar Water Heater

Closed Loop Solar Water Heater(split type) The split pressurized solar water heater system is consist of solar collector,workstation and water tank.The solar collector can be installed on roof or wall,no matter it is flat or tilt.The water tank also can be put anywhere as you want.The heat was transferred from solar collector to water tank by controller.High efficiency and cost save.specifications and details:Heatpipesolarcollector 1.Internationallycertifiedproduct 2.Reliable,efficient,twin-glassevacuatedtubeswithcopperheaterpipesforrapidheatertransfer,nowaterenterintothetube,canbeusedincoldarea. 3.Easyplug-ininstallationandmaintenance. 4.Suitableformainspressurewater(upto8bar/116psi) 5.Corrosionresistantsilverbrazedcopperheater. 6.Stablesolarconversionthroughouttheday(tubespassivelytrackthesun) 7.Perfectsolarcollectorfordomesticsolarwaterheatersystems. 8.Idealforhome orbigprojectlikeswimmingpool,school,hotel.Water tank: Details information:1. Capacity: 100L,150L,200L,250L,300L,400L, 500 L.2. Type of tank: Pressurized, vertical or horizontal, working pressure up to 650Kpa (6.5bar).3. The tank body: SUS304 stainless steel, thickness 1.0 -2.0mmThe outer cover: Multi-color steel board, thickness 0.5-1.0mm4. The insulating layer: 50mm high-density polyurethane.5. The heat exchanger: Copper coil in out dia. 12mm, single coil or twin coils design available.6. The auxiliary heater: 1.5 -2.5KWWorkstation: The workstations are imported from Germany, Italy and Japan.Workstation including: an expansion tank, a circulatiion pump, a controller, a balancing valve, a pressure gauge, a safety valve, a check valve.