CLAW TRACTOR DRILLING RIG

CLAW TRACTOR DRILLING RIG

original price: 450 000 USD
Jiangmen, China
Production capacity:
1 Unit
nixon xing
Contact person

Basic Information

Products Features 1. EngineThe Claw tractor drilling rig uses 6CTA83-C300 middle cooling diesel engine with adding pressure made by Cummins of u.s.a. Output power is 224kw (300HP), rated rotational speed 2200r/min. The engine is strong and of low noise, environment protection and low fuel consumption.2. ChassisClaw tractor chassis can be extended. The width of extension is 3000-4300mm, it is very convenient to carry the claw tractor drill. It works steadily. The tightening instruction of oil cylinder can ensure the claw tractor crawls more reliably. It can be driven at a speed of 1.6km/h.3. Hydraulic SystemThe system uses main oil pump of Rexroth A8V107 to supply oil to engine head, main winch and make main winch and main engine head work together at the same time. A10VO is used in auxiliary hydraulic system to control flow volume. The variable angle of mast is controlled by pilot electrical hydraulic proportion. The control valve with pressure compensation is under control by loading sensor. The system is of high efficiency, gentle adjustment and easy operation.4. Engine HeadWith features of high-speed throw soil function. The engine head fits to adjust drill speed and rated torque of output according to any different geological conditions. Sole grease, cooling, hydraulic system with changing speed can ensure engine head to work reliably and efficiency.5. Drill MastThree-section folded masts is featured by shorted length and height while transportation.6. Operation CabOperation cab is big, safe and comfortable. It can be used for a whole day. Controlling plate can be operated on both sides, manual controlling components are placed clearly and easy to touch. It has general engine control appearances, adjusted equipment for watching masts tilting angle of axial X-Y and electronic depth screen. Air conditioner, fire extinguisher, lamp, safe exit, etc, can be controlled by the operator.7. Auxiliary WinchStepless controlling is used in auxiliary winch for motor’s speed. The result makes large torque while driving on off ways. It also can be satisfactory to loading. The pulling force with single rope is 200kN, it can rise and fall down drill pipes. Pulling force of auxiliary winch’s single rope is 90kN. It can help drilling pipes to be hung up.8. Drill PipeMain winch can extend with lock. Multi- type drill bar can drill as deep as up to 60m. It can drill with drilling pipe’s diameter of 800-2000mm.

Delivery terms and packaging

Packaging Detail: Nude cargo Delivery Detail: 8 months
Port: SHENZHEN

Payment term

Letter of credit

Telegraphic transfer

Western Union

Фотографии

    Password recovery
    To recover your password, please enter in the box below your email address with which you have registered:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    An error has occurred. Please check your e-mail address and try again.
    Ваш новый пароль:

    Name is empty


    Выберите страну доставки

    You have not written a message

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    Your message has been sent!

    Close

    1
    Рынок B2B
    Cancel Close
      Show more close
        Area search
        Worldwide
        Категории
          Product