Chip Metal alloy resistor

Chip Metal alloy resistor

Dongguan, China
Dongguan, China
Company
86-0769-85383840
yaotao chen
Contact person

Basic Information

Place of Origin Guangdong China (Mainland)
Brand Name KeLu
Model Number chip resistor
0402,0603,0805,1206 - Thick Film Chip Resistors Network - High Stability - High Reliability - High Precession- Thick Film Chip Resistors Network YC4P2R - ELECTRICAL CHARACTERISTICSSTYLEYC12Power Rating at 701/10WOperating Temp. Range-55 to +125(Derated to 0 Load at +125)Maximum Working Voltage50VMaximum Overload Voltage100VDielectric Withstand Voltage100VNumber of Resistors2Resistance Range10Ω 1MΩTemperature Coefficient-+200PPM/Resistance Tolerance-+5% Electrical properties of YC12 series: Power rating at 70 degrees Celsius: 1/16W Operating temperature: -55 to +125 degrees Celsius (derated to 0 load at +125 degrees Celsius) Maximum working voltage: 50V Maximum overload voltage: 100V Dielectric withstand voltage: 100V Number of resistors: two Resistance range: 10 to 1M ohms Temperature coefficient: +/-200ppm/degrees Celsius Resistance tolerance: +/-5%, +/-1% Environmental properties of YC12 series: Temperature coefficient: MIL-STD-202F, method 304, -55 to +125 degrees Celsius, +/- 200ppm/degrees Celsius Thermal shock: MIL-STD-202F, method 107, 5 cycles, -55 to +125 degrees Celsius (step by step 2 minutes), +/- (1%+0.05 ohms) Low temperature operation: MIL-R-55342D, para.4.7.4, one hour at -65 degrees Celsius followed by 45 minutes RCWV, +/- (1%+ 0.05 ohm) Short time overload: MIL-R-55342D, para.4.7.5, 25 times RCWV for 5 seconds, +/- (2%+ 0.05 ohm) Insulation resistance: MIL-STD-202F, method 302, RCOV for 1 minute, >10G ohms Dielectric withstand voltage: MIL-STD-202F, method 301, R.M.S for 1 minute, by type Resistance to soldering heat: MIL-STD-202F, method 210C, soldered to test board at 260 degrees Celsius for 10 seconds, +/- (1% + 0.05 ohm) Moisture resistance: MIL-STD-202F, method 106F, 42 cycles Total 1000 hours, +/- (2% + 0.1 ohm) Life: MIL-STD-202F, method 108A, 1000 hours at 70 degrees Celsius RCWV intermittent, +/- (3%+ 0.1 ohm) Solderability: MIL-STD-202F, method 208G, 230 degrees Celsius for 5 seconds, >95% coverage Bending strength: JIS-C-5202, para.6.1.4, unit mounted in center of 90mm board length, deflected 1mm in either direction for 5 seconds, +/- (1%+ 0.05 ohm) Also available for YC16 and YC32 series: Power rating at 70 degrees Celsius: 1/16W and 1/8W Resistance tolerance: +/-5% Also available for YC15, YC17 and YC35 series: Power rating at 70 degrees Celsius: 1/32W, 1/32W and 1/16W Resistance tolerance: +/-5%

Delivery terms and packaging

Port: shenzhen

Payment term

Telegraphic transfer

Western Union

Фотографии

    Password recovery
    To recover your password, please enter in the box below your email address with which you have registered:
    The password reset code has been sent to your Email.
    Код уже был отправлен Вам ранее.
    Вы можете ввести его в поле выше, или получить новый код через сек.
    An error has occurred. Please check your e-mail address and try again.
    Ваш новый пароль:

    Name is empty


    Выберите страну доставки

    You have not written a message

    By clicking on the "Send" button, you agree that your data will be used to process your request. Further information and revocation instructions can be found in the data protection declaration.

    Your message has been sent!

    Close

    1
    Рынок B2B
    Cancel Close
      Show more close
        Area search
        Worldwide
        Категории
          Product