Charging drinking water pump

Details forCharging drinking water pump HL-10.Gift box size(cm)N.WG.WPackageΦ7×7×6812kg13kg30pcs/cartonOne 20'FCL: 6570PCSOne 40' HQ FCL:17880PCSDIRECTION: 1.For first time using,please charge the battery for at least 12-14 hours and make sure the battery work till exhausted 2.For first time using,let water run for 30 or 60 seconds to clean out pump 3.Snap on the discharge hole on the frame of the pump 4.Push button "on" and the water will flow,push "off" to stop 5.Remove the tube cover cap and attatch to the bottle neck,after adjusting the cap to adapt the height of the containerCAUTION:1. Keep away from heat or flame 2. Keep iterectlywhen it is not in use3. Run it after submerging in the liquid. 4. Remove batteries while notin use for a long time 5. Don′t disassemble the product yourself, don′t use in a strong volatile,flammable,corrosive or hot liquids (above 140 °F/60°C ) 6. Keep tube cover away from bottom of the container. 7. Wash the inside of inlet by running water through after using liquid other than water. 8. Keep all parts of pump out of water except supply tube and cover. 9. Make sure the AC is stable .10. Keep it away from children when the battery is charging. 11. Pump noise is normal. 12. It is normal that the water may flow during operating 13.Do not use the pump for more than 8mins ,that will hurt the motorCixi Huile Electrical Appliance Co., Ltd, appreciated your visiting so much. Brief advantages of us: 11 years experiences, biggest manufacturer. Expanded to all over the world, especially Turkey, Brazil, Europe ,South America Market. OEM is available, factory has manufacture for many Brands, such as “INTER COOL”… More details, pls don’t hesitate to send us an enquiry or make a phone directly