ceramic hair straightener -coin machine

1) Installation: The standard GlideHair unit consists of the main unit with stylers, holder & keys. The unit is designed for installation on all types of walls and will allow for the electrical supply to enter either at the bottom of the unit or the rear of the unit. The sequence of installation is as follows: Open the unit and remove the doorUnplug and remove the styler assembly.Position the unit where desired on the wall and mark the location of the 4 fixings.Remove the existing cable and plug (if fitted).Bring the power supply cable in either from the rear of the unit (drill a hole in the backing plate to allow the cable to pass through) or from the bottom edge of the unit where a cable entry holes is provided.Connect the supply cable to the connector block. Pass the cable through the cable clamp and securely tighten so that the supply cable is firmly gripped by the clamp.Fix the unit to the wall with the recommended fixings for the type of wall.Plug in and refit the styler assembly.Ensure that the supply cable to the unit is covered by securely fixed conduit.Refit and lock the door (Fig 6).Test the unit by inserting a coin.The Glidehair unit is now ready for use! 2) The spec: 1. The main unit with stylers, holder & keys. 2. Professional hair styler 3.Super fast ceramic heating elements enable rapid heat up to maximum temperature 200°C with 30 seconds 4. Constantly flashing indicator ensures continual provision of heat 5. Professional tourmaline plates with Korean technology which emit negative ions to create amazing shiny and silky finish 6. Simple on-off switch for easy and convenient use 7. Professional tangle-free 3 meter 360° swivel cord 8. Far infrared rays radiate gentle heat 9. Slim and ergonomic design for easy use 10. It’s for EUR2 coins only. 11. Always replace styler in holder 12. MCH heater 13. Power: 35W 14. Plate size: 90x24mm Performance Pledges 1,Two year guarantee 2,Faulty rate is below 1% 3,Replace the quantity of the faulty products at the following shipment