Central Air Conditioner Thermostat

CentralAir Conditioner ThermostatGeneral AC813 series Room Thermostat, with multi,updated and computerized functions, detects different temp between ambient and setting temperature using precise NTC sensor(internal only) to adjust Heating and Cooling. Hence, it keeps the room at comfortable and constant temp.. It could be programmable and non-programmable. Characteristics NTC Bright back-lit display with interactive touch screen; Setting Turn on/off within 24 hours Adjustable manual 3-speed or automatic fan speed control,High,Medium and Low Attractive modern styling and smart out-looking(12mm only for surface board) May connect to main system Manual operation available Data Memory:If the power cut off accidentally,it could be continuing to work by order if the power returns Technical Data Power Supply:AC100-240V Consumption: <1.5W Load Current: < 3A Accuracy: ±1ºC Set-point Range: 10.0ºC - 30.0ºC Timing Error: <1% Output Consumption: <200 W Size: 120mm x 90mm x 45mm (Length* Width * Thickness) Applicable Basic Function: Turn on/off power in 8 hours timely; Adjustable manual 3-speed or automatic fan speed control,High,Medium and Low; Data Memory:If the power cut off accidentally,it could be continuing to work by order if the power returns Available for: Fan coil unit Two-line Motorized Valve Three-line Motorized Valve Solenoid Valve Heating Equipment Three-speed angle fan valve Programmable Setting (optional) Below is an example of 5+1+1 Programmable operation. The steps of setting for one week are 18 ( from 1 to 18, please refer to following instruction and chart)Touch "Function" key, and then operate as following: Minute setting of Clock---Hour setting of Clock----Week setting -----Minute setting of turn-on(first time zone)----Hour setting of turn-off ( second time zone) ----Hour setting of turn-off (second time zone)------Temp.Setting Week First Time ZoneSecond Time ZoneTurn-onTurn-offTemp.SettingTurn-onTurn-offTemp.SettingMon.-Fri.123456Sun.789101112Sat.131415161718