CCTV Security Tester

Feature:Video signal testing function:3.5"TFT-LCD, 960(H)×240(V)resolution. PAL/NTSC, Adjustable brightness, contrast, color of LCDVideo signal strength testing function Test whether the signal is weaken or excessively high. If video wire cable is too long, the signal will decay and image to be dim, reducing the image's Dynamic range; if signal overtops, it will cause the blur. CCTV Tester's video signal testing function, can display the electrical lever of video signal; if it exceeds the range, tester's screen will prompt you.PTZ Control functionIt built-in Pelco-D/P, SAMSUNG, Panasonic etc., about 20 kinds of PTZ control protocol. Through its own RS485 or RS232 connector, users can control PTZ's up, down, left, right as well as the adjustment of zoom camera's zoom, focus and iris's big or small.It can send orders to make the PTZ move without a break andtest whether PTZ move smoothly.It supportstesting of the adjustment for horizontal moving and speeds the setup of preset level, calling of preset function. it can call the speed dome's OSD menu, edit the speed dome's data.Multi system image generator function It can send the PAL, NTSC standard color image bar, then judge the video row whether work smoothly. It can also be used at video out connector to send color picture, then receive it at the connector. It suitable be used the test of video transfer on spot, such as video, video wire cable and so on.DC12V 1A power supply output functionAudio test functionNet work cable testing function It can test the connector by the UTP CABLE TEST on it, can test the connect way of all kinds of cable.PTZ Control data capturing and analyzing function.It can capture the multifunctional keyboard or the control protocol code from DVR's control setup by RS 485/RS232.test the PTZ order whether received normally, test the transfer of RS484/RS232.the screen display 16 system code, such as PELCO-P:AO OO(Address) xx xx xx xx AF xx PELCO-D:FF 01(Address) xx xx xx xx xxPTZ Address scanning function It can help to find the address of the speed dome, then it will be convenient for the of the speed dome. It will save a lot of time and raise the work rate.High precision full-featured Digital MultimeterHigh precision Specification:ModelAPG-VTESTPRO-120Video testSignal modeNTSC/PAL (Auto Adjust)Video Output Mode1.0 VppDisplay3.5 inch TFT-LCD, 960 x 240 resolutionLCD adjustAdjustable brightness, contrast, color of LCDVideo IN/OUT1CH Input & 1CH OutputVideo Level TestLevel testVideo signals measured in IRE or mVPower OutputPower outputDC12V, 1AAudio TestAudio input1CH Audio inputPTZ controllerCommunicationRS232, RS422 simplex and RS485PTZ ProtocolCompatible with more than 20 protocols such as PELCO-D/P, Samsung, Panasonic, Lilin, Yaan, etc.Baud Rate150,300,600,1200,2400,4800,9600,19200bpsDigital MultimeterMulti-MeterVoltage, current, resistance and capacitance measuring, continuity testing, diode testing.Laser power meter testWave length, power range, response, optical interface, lock show testingColor image generatorVideo signal generatorSend the PAL, NTSC standard color image bar signal by video out port, support 7 modes.UTP Network Cable testCable testTest any 2 or more cable, it will display the connected order and number on screen.Protocol data capturing Protocol data capturingCan receive, display the RS485/RS232 protocol code date which sent by control equipment.PowerPower AdapterDC 5V(2A)Battery Power supplybuilt-in 3.7V Li-battery, capacity for 3000mAhbattery chargingNeed 3-4 hours, can normally used for about 11hours.Power save functionLow power consume, auto holding stateOther ParametersOperation setupChinese, English OSD Menu(optional)Auto holding stateOFF/5-60MinutesAudio for keyboardON/OFFworking condition and standardWork Temperature-10---+50 degreeWork Humidity30%-90%Dimension/Weight170mm x 99mm x 48mm / 293g