Standard |
BS |
Grade |
10#-45# |
Thickness |
0.035 - 0.875 inch |
Outer Diameter |
0.875 - 18 inch |
Place of Origin |
Tianjin China (Mainland) |
Section Shape |
Round |
Secondary Or Not |
Non-secondary |
Application |
Fluid Pipe |
Technique |
Extruded |
Certification |
CE |
Surface Treatment |
Galvanized |
Special Pipe |
API Pipe |
Alloy Or Not |
Non-alloy |
PackingPlastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips TestChemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, Impact Test etc), Exterior Size Inspection. Mill Test Certificate EN 10204/3.1B Item DescriptionQuality StandardSteel GradeSizePackingTestCASING, TUBING FOR WELLSSY/T 6194 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells API 5CT CASING AND TUBING BS ENISO 11960 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells NFM87-207 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells JIS G3439 SEAMLESS STEEL OIL WELL CASING, TUBING AND DRILL PIPE IS : 4270 Steel tubes for well spainend casing pipes H-40, J55, K-55, N-80, C-75, L-80, C-90, T-95, Q-125OuterDiameter: Casing: OD 4 1/2"- 20" (114.3mm-508mm) Tubing: OD 2 3/8" - 4 1/2" (60.3mm-114.30mm) Wall Thickness: 0. 205"- 0.635" Length: R1(4.88mtr-7.62mtr), R2(7.62mtr-10.36mtr), R3(10.36mtr or longer) Connection: Casing: LTC, STC, BTC, VAM. Tubing: NUE, EUE. End: Beveled, Square cut. And pipe protection cap specially for casing and tubing. Surface: Corrosion proofing water based paint Heat treatment: Normalized, Quencher+Temper Plastic plugs in both ends, Hexagonal bundles of max. 2,000kg with several steel strips, Two tags on each bundle, Wrapped in waterproof paper, PVC sleeve, and sackcloth with several steel strips. Chemical Component Analysis, Mechanical Properties (Ultimate tensile strength, Yield strength, Elongation), Technical Properties (Flattening Test, Flaring Test, Bending Test, Hardness Test, Blow Test, Impact Test etc), Exterior Size Inspection, Nondestructive Test (Ultrasonic flaw detector, Eddy current flaw detector), Hydrostatic Test.