Capacitor bopp film

Types: MP-1:Metallization MP-H:Metallization,with higher temperature resistance. Specification: Thickness (μm) Width (mm) Roll Diameter (mm) 4 20 200 1000 300 500 Characteristics: lower Variation of Thickness. Excellent dielectric property. Stable dielectric constant and low dissipation. Excellent metallization property. Typical Physical Properties: Items Test Methods Units Typical Value Thickness GB 6672 μm 7 Ave. Variation of Thickness GB/T13541 % +0.2 Tensile strength (MD/TD) GB 13022 MPa 160/280 Elongation at Break (MD/TD) GB 13022 % 145/50 Heat Shrinkage (MD/TD) MP-1 GB 12026 % 3.5/0.5 MP-H 3.0/0.1 Density GB 1033 g/cm3 0.91 Surface Roughness(in/out) GB/T13541 μm 0.08/0.08 Wet Tension (Treated Side) GB/T 14216 mN/m 40 Dielectric Strength(Ave/Min)DC GB/T13541 V/μm 496/406 Dielectric Constant GB/T 13541 —— 2.2 Dielectric Consumed Angle tangent GB/T 13541 —— 2.0×10-4 Volume Resistivity GB/T 13541 Ω·m 1.9×1015 Notes: MD: Machine Direction; TD: Transverse Direction. The above data can only be regarded as typical physical properties, not guarantee values. Application: MP is a film for metallization which to be used as dielectric materials for capacitors; MP-H is a film for metallization which to be used as dielectric materials for capacitors with higher temperature resistance. Industrial Standards: “BOPP Film for Capacitor”, national standard of the People’s Republic of China (Standard Code: GB/T 13542.3-2006) Transportation and Storage Notices: Any impact or collision during transporting, loading and unloading may result in the damage of roll surface and edge. Storage in shady, cool and dry condition avoiding direct sunshine and rain is recommended.